The Wheeler Delta Series AR-10 Bore Guide will help protect the bore and action of your rifle by properly aligning the cleaning rod and reducing solvent overflow. Cleaning without a bore guide can allow the rod to ?bow? and rub or gouge chamber and throat of the bore causing real damage and loss of accuracy. Keeping the rod properly aligned not only protects your barrel it directs the force exerted on the cleaning rod handle allowing tight patches to be pushed more easily.

The AR-10 Bore Guide is precision CNC machined aluminum with a durable anodized finish. It fits securely in any AR-15 upper and can be retained in place by closing the dust cover on the upper which engages a groove in the guide. The bore guide also has chemical resistant O-rings for retention in uppers without dust covers. A solvent port is conveniently located to the rear of the guide which extends out of the upper making it easily accessible during cleaning.

• Protects chamber & bore from damage
• Ensures proper rod alignment for easier cleaning
• Reduces solvent leakage into gun?s action
• Anodized aluminum for durability
• Integrated solvent port
• AR-10/LR Bore Guide fits .308
• Secures in place with dust cover engagement

This multi-tool design can be used to perform many different functions in the field. When you need to make adjustments or scrape some carbon build-up simply reach down and grab this tool out of the included nylon belt sheath and go to work. After you are finished snap the tool back in and continue shooting.

• Includes 2 hammer bodies and 8 hammer faces
• 4 hammer faces with each hammer body: metal brass nylon rubber
• Hammer bodies made of precision machined metal
• Large Hammer (10 oz) for driving out large or stubborn roll pins
• Small Hammer (6 oz) for precise control of smaller roll pins
• Steel Head – For metal punches and surfaces
• Brass Head – For preventing marring of metal surfaces and for brass punches
• Plastic Head – Non marring
• Rubber Head – Low recoil and can prevent denting of wood
• Comes with Durable Blow Molded case that organizes holds and protects components

Wheeler Engineering combined the Roll Pin Starter Set and the Ball Profile Roll Pin Punch Set with a precision machined gunsmithing hammer into one comprehensive kit.

Ball Profile Roll Pin Punch Set :

• Machined and hardened from steel to prevent bending or breaking while driving roll pins
• Designed with a ball profile tip to provide proper alignment of the roll pin and prevent damage to the firearm or roll pin
• The 9 piece set includes: 5/16 in. 1/4 in. 7/32 in. 3/16 in. 5/32 in. 1/8 in. 3/32 in. 5/64 in. 1/16 in.
• Keeps punch from walking off pin
• Knurled handles

Roll Pin Starter Set :

• Machined and hardened from steel to prevent bending or breaking while starting roll pins
• Designed with a counter-bored tip to properly align and start the roll pin preventing damage to the firearm
• The 9 piece set includes: 5/16 in. 1/4in. 7/32 in. 3/16 in. 5/32 in. 1/8 in. 3/32 in. 5/64 in. 1/16 in.
• Knurled handles

Small Hammer :

• Small Hammer (6 oz) for precise control and smaller roll pins
• Steel Head – For metal punches and surfaces
• Brass Head – For preventing marring

The Wheeler Engineering Precision Micro Screwdriver Set features high quality chrome plated steel bits to hold up to heavy use and the comprehensive 58 piece set meet all of your precision screwdriver needs. The set include a handle that extends from 3-3/4″ to 5-1/2″ and a 5-3/4″ flexible extension shaft to get you into those hard to reach places. The set comes organized with individual bit markings and a convenient carry/storage case. All bits are precision formed for maximum fastener engagement. Chrome plated steel bits Extendible Handle from 3-3/4″ to 5-1/2″ 5-3/4″ flexible extension shaft 58 piece set. Organized carry/storage case.

• Nut Drivers (in mm): M2.5 M3 M3.5 M4 M4.5 M5
• Hex Bits (in mm): H.7 H.9 H1.3 H1.5 H2 H2.5 H3 H3.5 H4
• Square Bits: SQ 0 SQ 1 SQ 2
• Flat Bits (in mm wide): 1 1.3 1.5 2.0 2.5 3.0 4.0
• Phillips Bits: J000 J00 J0 J1
• PH000: PH00 PH0 PH1 PH2
• Triangle Bits: 3.0 2.3 2.0
• Star Bits: .8 1.5 2.0
• U Bit: 2.6
• Torx Bits: T3 T4 T5 T6 T7 T8 T9 T10 T15 T20
• Y Bits: Y0 Y1
• Screwdriver handle adapter

The Wheeler Engineering Professional Gunsmith File Set by Battenfeld is perfect for many different gunsmithing jobs. The set comes with a wide grade of files from a rough rasp all the way down to a super extra fine diamond plate. Whether your reshaping a wood stock or smoothing out an action this set is perfect for you.

1 – 8? half round file

• 1 – 8? flat file
• 1 – 6? square file
• 1 – 6? triangle file
• 1 – 6? round file
• 1 – 4-n-1 Rasp
• 1 – file cleaning brush
• 1 – extra fine diamond plate
• 1 – stick of file chalk
• 1 – small flat coarse grit diamond file
• 1 – small round coarse grit diamond file
• 1 – small triangle coarse grit diamond file
• 1 – small flat medium grit diamond file
• 1 – small round medium grit diamond file
• 1 – small triangle medium grit diamond file
• 1 – small flat fine grit diamond file
• 1 – small round fine grit diamond file
• 1 – small triangle fine grit diamond file

Technological advances in today?s modern firearms ammunition and optics have enhanced the potential for long range accuracy. However precision mounting and alignment of your system?s scope is critical to realizing the accuracy. A scope?s reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur.

The Wheeler Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining factory adjusted calibration set screws anodized aluminum construction and protective molded case put this instrument in a class of its own.

The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.

• Precision tool for scope reticle alignment Factory calibrated Reference Level
• Maximize accuracy potential Tunable Barrel Clamp Level
• CNC machined aluminum level housings Protective storage case

The Wheeler Engineering Roll Pin Punches are machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16" 1/4" 7/32" 3/16" 5/32" 1/8" 3/32" 5/64" 1/16" punches in a nylon pouch.

• 9-piece set 1/16" through 5/16"
• Hardened Steel construction
• Hemispherical Tip
• Fitted Nylon Storage Pouch

Complete your workbench with the Wheeler 30-Piece P-Handle Driver Set. The sleek molded stand design paired with its ability to be mounted on the wall allow for quick convenient access to the SAE Hex Metric Hex and Torx drivers. This screwdriver set is the perfect addition to any workshop.

• Molded stand can sit on bench top or has mounting holes on back for hanging
• SAE Hex (3/32 7/61 1/8 ball 9/64 ball 5/32 ball 3/16 ball 7/32 ball 1/4 ball 5/16 ball 3/8 ball)
• Metric Hex (1.5mm 2mm ball 2.5mm ball 3mm ball 4mm ball 5mm ball 6mm ball 7mm ball 8mm ball 10mm ball)
• Torx (T7 T8 T9 T10 T15 T20 T25 T27 T30 T40)

Mounts ANY Scope 1" or 30mm This complete kit provides everything necessary to mount virtually any 1-inch or 30mm scope the correct way. Proper scope installation is critical to the accuracy of your firearm. Alignment and Lapping of rings ensure maximum surface area contact between scope tube and rings. This not only helps the rings hold the scope more securely but also protects your scope from damage misalignment can cause.

The Wheeler Alignment Bars Lapping Bars and Lapping Compound allow you to achieve the perfect fit between scope and rings. Reticle Leveling is also a key component to the accuracy of your set up. Crosshairs that are not properly leveled will result in errors in left/right windage especially at longer distances. Misalignment can also compromise true linear movement from turret adjustments.

The Wheeler Level-Level-Level makes it quick and easy to get the reticle perfectly aligned with your gun. Securing Fasteners properly is critical to accuracy as well. Precisely controlled torque along with thread locking compound will keep your scope held securely in place.

Professional grade bits and the F.A.T. Wrench are the perfect combination to properly secure fasteners without deformation.

• F.A.T. Wrench torque screwdriver
• 10 Gunsmithing Screwdriver Bits
• Level-Level-Level
• 1" Scope Ring Lapping Bar
• 30mm Scope Ring Lapping Bar
• 1" Scope Ring Alignment Bars
• 30mm Scope Ring Alignment Bars
• Lapping Bar Handle
• Lapping Compound
• Thread Lock

Take the guess work out of torqueing gear on the go. The Wheeler F.A.T. Stix Limiters are preset to specific torque values allowing the user to easily grab the right tool for the job. Accurate within +/-5% F.A.T. Stix ensure a loose or stripped screw doesn’t ruin your day.

Features:

• Preset torque limiters are quick and convenient with no adjustments required
• Accurately tightens to desired specification preventing damage and stripped screws
• Multiple options to fit a variety of jobs

Take the guess work out of torqueing gear on the go. The Wheeler F.A.T. Stix Limiters are preset to specific torque values allowing the user to easily grab the right tool for the job. Accurate within +/-5% F.A.T. Stix ensure a loose or stripped screw doesn’t ruin your day.

Features:

• Preset torque limiters are quick and convenient with no adjustments required
• Accurately tightens to desired specification preventing damage and stripped screws
• Multiple options to fit a variety of jobs

Take the guess work out of torqueing gear on the go. The Wheeler F.A.T. Stix Limiters are preset to specific torque values allowing the user to easily grab the right tool for the job. Accurate within +/-5% F.A.T. Stix ensure a loose or stripped screw doesn’t ruin your day.

Features:

• Preset torque limiters are quick and convenient with no adjustments required
• Accurately tightens to desired specification preventing damage and stripped screws
• Multiple options to fit a variety of jobs

The Wheeler F.A.T. Wrench (Firearm Accurizing Torque) brings perfect consistency to every screw on your rifle. This amazing industry-standard handheld torque wrench lets you apply repeatable accurate torque. Why is this important? Because precisely tightened screws and mounts prevent damage to optics and firearms and decrease the chances of failure in the field. Equipped with an adjustable torque range that delivers 10-65 in-lbs. it’s engineered to tackle a wide variety of common gunsmithing tasks like tightening scope bases and rings action screws and more with precision.

The driver features a magnetized tip to prevent bits from falling out and a textured rubber over-mold that improves ergonomics and grip while reducing hand strain during high torque applications.

The 10 included bits are treated with a black phosphate coating that prevents rust and corrosion and extends tool life; guaranteeing that your tools will look great for years to come.

All the contents are neatly organized and secured in a premium latching hard case that easily stacks on top of other Wheeler screwdriver sets for smart convenient storage.

Take full control of your custom build with the Wheeler Gas Block Taper Pin Removal Tool. Whether you have a vise or just a ball peen hammer the Support Block paired with the starter and finishing punches makes removing A2 style gas blocks quick and easy. Built with durable tool steel this is a must-have for any work bench.

The Wheeler Hammer and Punch Set includes a polymer/brass combination hammer eight precision brass punches four steel punches and two plastic punches. It makes a great tool for driving pins drifting sights at the shooting range or on your workbench. Includes a convenient carry case that securely holds all components.

Experience unmatched convenience and organization in your workspace with the Wheeler® 30 Piece Hex/Torx Benchtop Screwdriver Set. Engineered to be an all-in-one tool assortment this comprehensive collection contains 10 SAE Hex 10 Metric Hex and 10 Torx screwdrivers to cover a wide range of common fasteners guaranteeing you have the right tool for the job. Features include color-coded handles and markings offering quick identification of each screwdriver type and size ensuring you spend less time searching for the right tool. Textured rubber over-molded handles fit comfortably in the hand increasing grip while reducing hand strain. The black phosphate-coated shafts protect against rust and corrosion giving you peace of mind that your tools will be long-lasting and look great on your bench for years to come. The sturdy benchtop stand ensures that your tools stay organized preventing tool loss and time spent looking for misplaced tools. The versatile 3-piece modular stand not only keeps the tools organized but also detaches for ultimate portability.

• Comprehensive 30 Piece Screwdriver Set Engineered To Be An All-in-one Tool Assortment For Common Sae/metric Hex Or Torx Fasteners?
• Included Benchtop Stand Ensures An Organized Workspace Effectively Preventing Tool Loss And The Time-consuming Search For Misplaced Tools?
• Rubber Over-molded Textured Handles With Improved Ergonomics Increase Grip While Reducing Hand Strain?
• Color-coded Handles With Size Markings Allow For Quick Identification And Minimizes The Time Spent Searching For The Right Screwdriver?
• Black Phosphate Coating On The Driver Prevents Rust And Corrosion While Keeping The Set Looking Good For Years

FEATURES:
-Material: Lead
-Each shim measures approximately 2.25″ x 4″
-Shim thickness approximately .040″ to .048″
-For use w/ the Wheeler Barrel Vise

FEATURES:
-Accurately transfers the toe-line angle & the comb line from the stock to the new recoil pad
-Fits most recoil pads
-Also serves as a stable work holding fixture for off-the-stock sanding of the pad

FEATURES:
-Replacement barrel shims for use w/ Wheeler Barrel Vise
-Includes 1″ & 3/4″ predrilled blocks & a solid block for custom drilling
-Oak

The Wheeler Engineering Roll Pin Punches are machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16 1/4 7/32 3/16 5/32 1/8 3/32 5/64 1/16 punches in a nylon pouch.

• 9-piece set 1/16 through 5/16
• Hardened Steel construction
• Hemispherical Tip
• Fitted Nylon Storage Pouch

Store all your key sets in one place with the Wheeler 45-Piece Key Set. This small set takes up little space on your workbench and will allow for you to store all SAE Metric Hex and Torx Keys together. Never again will you have to dig around for odd or different sizes simply open your kit turn to the page you need and continue working.

Kit Includes:
-Two 1″ alignment bars
-1″ lapping bar
-Two 30mm alignment bars
-30mm lapping bar
-Lapping bar handle
-220 grit lapping compound
-Complete instructions

Wheeler Scope Ring Alignment and Lapping Kit 34mm