YHM originally designed a Billet lower that mimicked a standard (forged) lower receiver, but after seeing the prototype production they decided to go with a receiver that was more stylized, something that didn’t look like every other AR-15 on the planet. It was this mindset that helped YHM arrive at the Model-57, and in turn this lower receiver. This lower is crafted from 7075-T6 aluminum and has a hardcoat anodized matte black finish. It features an oversized magazine well chamber for easier magazine changes. It accepts all generations of PMAGs and Mil-Spec upper receivers. It has a built-in, oversized, machined trigger guard. It fits all standard parts (except for a trigger guard) and still fits, and functions with your standard upper receivers. NOTE: Requires a lower parts kit, buffer & stock of your choosing to complete.
The Sidwewinder M2 suppressor is optimized to give you an affordable, lightweight suppressor packed with features typically found on more expensive models. The booster system has been completely redesigned and now uses the industry’s unofficial standard piston. Pistons from SilencerCo, Rugged, Dead Air, etc. can be used in the Sidewinder M2 and vice versa. The redesign also includes the ability to swap pistons without the use of tools thanks to a new rear cap. The front cap has been redesigned to allow for better engagement with the takedown tool to make the service process easier. The Sidewinder utilizes a high-efficiency mono-core baffle made from 7075-T6 aluminum that is class 3 hardcoat anodized. The outer tube is made from 6061-T6 aircraft quality aluminum which is also finished with class 3 hardcoat anodize. These materials offer high strength and longevity in a lightweight package. The Piston, Nielsen Sleeve and Blast Baffle are constructed from heat treated 17-4ph stainless steel. This type of stainless steel is extremely resistant to corrosion and wear, and will not degrade when exposed to extreme temperatures. The Sidewinder M2 is user serviceable which allows both the baffle and Nielsen device to be removed for cleaning and maintenance using the provided disassembly tool. YHM’s Nielsen device enables flawless semi-automatic operation on all relevant host pistols. The Sidewinder M2 has 12 index points that allow you to adjust point of impact while remaining attached to the host firearm. The average dry sound signature of the Sidewinder M2 9mm when testing to Mil-Std 1474D is 125 dB dry on a Glock G17 using 147gr. FMJ ammo. Shooting the suppressor “wet” will net even quieter results.
The Sidwewinder M2 suppressor is optimized to give you an affordable, lightweight suppressor packed with features typically found on more expensive models. The booster system has been completely redesigned and now uses the industry’s unofficial standard piston. Pistons from SilencerCo, Rugged, Dead Air, etc. can be used in the Sidewinder M2 and vice versa. The redesign also includes the ability to swap pistons without the use of tools thanks to a new rear cap. The front cap has been redesigned to allow for better engagement with the takedown tool to make the service process easier. The Sidewinder utilizes a high-efficiency mono-core baffle made from 7075-T6 aluminum that is class 3 hardcoat anodized. The outer tube is made from 6061-T6 aircraft quality aluminum which is also finished with class 3 hardcoat anodize. These materials offer high strength and longevity in a lightweight package. The Piston, Nielsen Sleeve and Blast Baffle are constructed from heat treated 17-4ph stainless steel. This type of stainless steel is extremely resistant to corrosion and wear, and will not degrade when exposed to extreme temperatures. The Sidewinder M2 is user serviceable which allows both the baffle and Nielsen device to be removed for cleaning and maintenance using the provided disassembly tool. YHM’s Nielsen device enables flawless semi-automatic operation on all relevant host pistols. The Sidewinder M2 has 12 index points that allow you to adjust point of impact while remaining attached to the host firearm. The average dry sound signature of the Sidewinder M2 .45 when testing to Mil-Std 1474D is 133 dB dry on a Glock G21 using 230gr. FMJ ammunition. Shooting the suppressor “wet” will net even quieter results.
YHM’s .30 caliber sound suppressor, the Resonator, was created to provide the shooting enthusiast a quiet, lightweight and cost-effective suppressor. Capable of being used on multiple calibers and host weapons, the Resonator can be used on rifle calibers ranging from .17 HMR through 300 RUM making it a great choice for all shooters. Like the Turbo, the Resonator uses a tubeless design which consists of heat treated 17-4 stainless steel and a heat treated 718 Inconel blast baffle which allows the suppressor to be full auto rated and designed for rigorous use.
The primary goal is to make it work across the board so that you, the shooter, can enjoy versatility across your entire arsenal all at a budget friendly price while maintaining that rugged durability youve come to expect from YHM. This was the intent with the R9 9mm a suppressor capable of handling high volumes of fire and the ability to run other calibers such as .300 BLK and .308 Win. It was primarily focused on suppressing 9mm (specifically sub-machine guns and SBRs). The R9 is capable of being used on a handgun in conjuction with our Nielsen Booster Assembly. It features 1 3/8″-24 rear mounting threads and ships in the 1/2″-28 Direct Thread format. The suppressor body is a fully-welded tubeless design, made from 17-4 PH Stainless Steel for increased strength and corrosion resistance. Sound Levels- 9mm- 125 dB on 10.5″ barrel, 123 dB on 4.25″ barrel and on a .308 Win- 142 dB on 20″ barrel.
Meet The Turbo T3-The newest member of the YHM Turbo suppressor family! This 5.56 NATO Suppressor sports an intentional design improvement to the internal geometry of the baffles-resulting in reduced blowback-when compared to the previous model. Built with the same care, quality, and attention to detail that has defined the YHM brand for generations, the Turbo was originally created to supply the modern suppressor community with a full-featured, American Made suppressor at an affordable price. The Turbo T3 has continued that mission and its MSRP includes a Q.D. Muzzle Brake -or- Q.D. Flash Hider, a Phantom Q.D. Adapter, and 2 suppressor wrenches. All YHM products are also backed by our Lifetime Manufacturers Warranty. The Turbo T3 is made from heat-treated 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures 5.59″ (6.5″ with Phantom Q.D. Adapter) with a 1.5625 diameter -all while weighing in at a surprising 12.8 oz! Having an average sound pressure level of 134dB on a 14.5 AR shooting 55-grain ammo, the Turbo T3 is well within the hearing safe threshold of 140 dB.
Meet The Turbo T3-The newest member of the YHM Turbo suppressor family! This 5.56 NATO Suppressor sports an intentional design improvement to the internal geometry of the baffles-resulting in reduced blowback-when compared to the previous model. Built with the same care, quality, and attention to detail that has defined the YHM brand for generations, the Turbo was originally created to supply the modern suppressor community with a full-featured, American Made suppressor at an affordable price. The Turbo T3 has continued that mission and its MSRP includes a Q.D. Muzzle Brake -or- Q.D. Flash Hider, a Phantom Q.D. Adapter, and 2 suppressor wrenches. All YHM products are also backed by our Lifetime Manufacturers Warranty. The Turbo T3 is made from heat-treated 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures 5.59″ (6.5″ with Phantom Q.D. Adapter) with a 1.5625 diameter -all while weighing in at a surprising 12.8 oz! Having an average sound pressure level of 134dB on a 14.5 AR shooting 55-grain ammo, the Turbo T3 is well within the hearing safe threshold of 140 dB.
The Turbo K is getting the same treatment as its bigger brother the T3. This 5.56 NATO Suppressor features a design improvement to the baffles-resulting in reduced blowback-when compared to the previous model. The Turbo K-RB utilizes a tubeless design made from heat treated 17-4 stainless steel along with a heat treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto rated and designed for rigorous use. The blast chamber of the Turbo K-RB is threaded to the popular 1.375-24 thread which allows it to utilize many available mounting options currently on the market. The notched rim and tri-port muzzle on the end cap make it stand out among the crowd. The overall length measures 4.9 and weighs in at 11.7oz. When using YHMs Phantom Q.D. adapter, the overall length is 5.5 and weights in at 12 oz. Having an average sound pressure level of 138dB on a 16 AR shooting 55 grain ammo, the Turbo K-RB is within the hearing safe threshold of 140 dB. The Turbo K-RB is built with the same care, quality, and attention to detail that has defined the YHM brand for generations. The Turbo K-RB ships with the Phantom Q.D. adapter, 2 suppressor wrenches and Q.D. flash hider. Minimum Barrel Lengths: 5.56 NATO: 10.5″ minimum barrel length
This 5.56 NATO Suppressor sports new baffle geometry resulting in reduced blowback. Built with the same care, quality, and attention to detail that has defined the YHM brand for generations, the Fat Cat was created to provide a compact suppressor with great sound. The Fat Cat is made from 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures just 4.5″ with the sRx adapter installed. That’s a full inch shorter than our Turbo K model with it’s included adapter. The Fat Cat’s larger 1.94 diameter creates more internal volume resulting in a lower, more pleasant tone. With an average sound pressure level of 141dB at the muzzle, the Fat Cat is quite the performer for its size. This model has the standard end cap.
This 5.56 NATO Suppressor sports new baffle geometry resulting in reduced blowback. Built with the same care, quality, and attention to detail that has defined the YHM brand for generations, the Fat Cat was created to provide a compact suppressor with great sound. The Fat Cat is made from 17-4 stainless steel along with a heat-treated 718 Inconel blast baffle. The combination of these materials allows the suppressor to be full auto-rated and designed for rigorous use. The overall length measures just 4.5″ with the sRx adapter installed. That’s a full inch shorter than our Turbo K model with it’s included adapter. The Fat Cat’s larger 1.94 diameter creates more internal volume resulting in a lower, more pleasant tone. With an average sound pressure level of 141dB at the muzzle, the Fat Cat is quite the performer for its size. This model has the “Cat’s Ass” end cap.
The Bad Larry .338 is designed for the needs of big-bore, long-distance shooters. Whether that means big game hunting, competitive shooting, or military applications. Engineered for versatility, this suppressor is compatible with a range of calibers including .338 Lapua magnum, 8.6 BLK and more, ensuring adaptability in various scenarios. Its robust construction of heat-treated 17-4 PH stainless steel and Cobalt 6 ensures longevity and performance. YHM maintains its commitment to economic accessibility without compromising on durability or performance, making this Bad Larry an ideal choice for those seeking top-tier performance at a reasonable price. Bad Larry ships with a 5/8-24 Direct Thread Adapter, and two suppressor wrenches. Bad Larry features 1.375-24 HUB mounting threads and is compatible with all YHM HUB accessories.
Looking to reduce as much weight and length as possible with your build? The Titanium Kurz Q.D, Adapter from YHM allows the user to shorten their Phantom Q.D. mounting system by .675 on any suppressor utilizing the 1-3/8-24 rear mounting threads and is 40% lighter than the 17-4 stainless steel version. Don’t just reduce size and weight from your build, do it with style and the durability you’ve come to know and love from YHM products. 1-3/8″-24 Thread Mount. Grade 5 Titanium. Matte Black Ion Bond Finish. Reduce Length by .675″. Weight: 1.2 Oz. Allows the use of YHM Q.D. Mounts to be used on suppressors that utilize 1-3/8″-24 threads
The Mini Q.D. Flash Hider is for YHM’s fast attach sound suppressor systems. Compact at only 2 1/8″ and weighing in 3.3 ounces, the Mini Q.D. Flash Hider was designed for today’s competitive shooter. No short cuts were taken and users will find that the Mini Q.D. Flash Hider is still capable of being shot comfortably unsuppressed as well as suppressed. Flash Hider is compatible with- Turbo T2’s, Turbo K’s, Resonator’s, Resonator R2’s, Resonator K’s, Nitro .30, all Phantom .30 caliber suppressors, as well as our new R9 9mm and NITRO N2O sound suppressors. The device should be torqued to between 20 and 30 ft-lbs.
YHM’s M-Lok Hand Stop / Barrier Stop easily mounts on M-Lok rails including YHM BLACK DIAMOND and MR7 series to provide excellent weapon control. The textured front side is for superior traction on barriers and obstacles. The unit allows the use of a Q.D. Sling Swivel (YHM-9466) from either side. Also allows the use of Clip or Safety Lock Slings on the front slot. Made from hardcoat anodized 6061-T6 aluminum. Includes all mounting hardware. Requires 1/8″ Hex Allen Wrench to install. 6061-T6 Aluminum. Mil-Spec Hardcoat Anodized. Length: 1 3/4″. Height off the hand guard: 1 1/4″. Weight: .75 oz.. Accepts Q.D. Sling Swivel on either side. Accepts Clip or Safety Lock slings on the front slot. Can be mounted on the hand guard in reverse, as a barricade support
This ambidextrous vertical grip is a simple, lightweight, and cost-effective device which secures tightly to any M-Lok mounting system. The low profile vertical grip design provides a positive hand hold in a small package. Adequately sized to allow the hand to take control of the front of the rifle, but not large enough to get in the way. Requires 1/8″ Hex Allen Wrench to install. 6061-T6 Aluminum. 2.95″ Tall. Weight 2.24 oz.. Hardcoat Anodized matte black to Military Specifications or better. Made in the USA.