This product listing is for a caliber specific funnel HEAD ONLY no funnel or billet storage block included. Please see “Master Kit" which includes six heads a handle and a storage block.

The Area 419 billet aluminum powder funnel uses a system of interchangeable caliber specific heads to make it the ultimate funnel for reloaders available today. Universal plastic powder funnels have several issues that are solved with this system.

1. Static cling plastic is prone to being charged with static and kernels of powder will stick to the walls causing you to have to tap the funnel to get them all to fall.
2. No such thing as universal. There are always cases that just wont work well with the universal design and funnels tip off and spill powder or they just plain wont work.
3. Universal means that it has a hole meant for 22 caliber. So if you are trying to dump 90 grains into a big magnum you are waiting a long time for the powder to fill.

The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber (color coded to keep track of them). The do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter so maximum flow is achieved for each caliber. This is huge for the super ultra magnum guys (375 Cheytac 408 Cheytac 50 BMG etc). The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two as long as the head is tightened completely.

The Funnel’s design is both aesthetic and performance driven. Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls. This also makes it far safer for use with black powder.

“Flutes” on the outside are for looks on the inside though they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly all aimed to increase flow through the nozzle.
3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in.
Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels.
MADE IN USA! From USA made aluminum on a USA made HAAS mill with USA made cutting tools!

This product listing is for a caliber specific funnel HEAD ONLY no funnel or billet storage block included. Please see “Master Kit" which includes six heads a handle and a storage block.

"Flutes" on the outside are for looks on the inside though they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly all aimed to increase flow through the nozzle
3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in
Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels
MADE IN USA From USA made aluminum on a USA made HAAS mill with USA made cutting tools

**Rear Fixed Barricade stop not included

MLOK HARDWARE NOT INCLUDED

Rail Features:
– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp will not damage bags or your hands.
– Rail is backwards compatible with standard Arca accessories but will not be locking without our clamp
– Rail is 10″ long giving you great real estate for attachments but not extending too far on shorter forends. The best part is it still only weighs in at a paltry 3.5oz
– Made to the RRS 1.5″ Dovetail Standard so you can be sure lever clamps will work
– No sharp edges. Every corner is radiused and every edge is chamfered on the machine. This takes longer to make but it is the only right way.
– While designed with Manners Composite Stocks in mind this rail accommodates a multitude of rifle and stock configurations that have an accessible front action screw and some sort of front attachment point(s).
– Designed to attach to the rifle up to 4 places for maximum strength and stability.
– Type 3 Hard Coat anodized for additional durability.
– Made from 6061-T6 Aluminum
– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs
– Rail comes with 1 long Remington 700-style action screw to fit the rail to the front action screw attachment point. Some trimming will likely be required.
– A 3/4″ paddle bit and drill press may be required for installation of tee-nuts depending on current rifle configuration. Tee nuts and hardware included.

Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail you’ve probably also seen it slide under much pressure.

Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*

Rear angled barricade stop sold separately.

THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS YOU’LL WANT A 12″ UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS

Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*

Rear angled barricade stop sold separately.

THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS YOU’LL WANT A 12″ UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS

Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*

**Rear Fixed Barricade stop not included

MLOK Hardware not included.

Rail Features:
– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp will not damage bags or your hands.
– Rail is backwards compatible with standard Arca accessories but will not be locking without our clamp
– Rail is 12″ long giving you the entire length of the stock forend for attachments. The best part is it still only weighs in at a paltry 4.1oz
– Made to the RRS 1.5″ Dovetail Standard so you can be sure lever clamps will work
– No sharp edges. Every corner is radiused and every edge is chamfered on the machine. This takes longer to make but it is the only right way.
– While designed with Manners Composite Stocks in mind this rail accommodates a multitude of rifle and stock configurations that have an accessible front action screw and some sort of front attachment point(s).
– Designed to attach to the rifle up to 4 places for maximum strength and stability.
– Type 3 Hard Coat anodized for additional durability.
– Made from 6061-T6 Aluminum
– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs
– Rail comes with extra Remington 700-style action screw of extended length to fit the rail to the front action screw attachment point. Some trimming will likely be required.
– A 3/4″ paddle bit and drill press may be required for installation of tee-nuts depending on current rifle configuration. Tee nuts and hardware included.

With the rapid growth in popularity of ARCA rails in precision rifle AREA 419 saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.

ARCALOCK has been a huge success since its release in July of 2018. As the rails have become more popular we have also seen the rise in popularity of rifle weight kits. With the introduction of the Manners TCS stock in late 2019 AREA 419 designed and built an ARCALOCK weight system and are ready to make it available to the general public. This is the 14.25″ Universal ARCALOCK Rail!

WHAT WILL IT FIT – Lots of things. AREA 419 anticipates this will fit about 98% of Manners PRS1 PRS1 T2A T2A GAP T4A T4A TEAM and T5A stocks. If you’re not sure if it will fit your rifle you can use the hole spacing print and some basic common sense to figure it out. They made this as universal as possible while still retaining weight tuning capability. These kits will come with t-nut hardware to add attachment points if your factory-installed attachment points do not line up with our mounting slots. While this can also be attached to MLOK it DOES NOT come with MLOK hardware (sold separately).

WEIGHT – The bare rail weighs just over 6oz. With all 5 included weights in the rail the weight ends up at about 23.6oz. Each weight weighs 3.5oz.

THICKNESS – These rails are .400″ thick. For reference their standard 14″ 12″ and 10″ Universal ARCALOCK rails are .270″ thick.

FINISH – Rails will be black hardcoat anodized and the weights will remain raw brass.

NOTE: Rail kits now come with only one action screw and it is a longer screw. With the endless action/stock/chassis combos we found that nearly everyone was required to trim the screw for fitment anyway so the longer screw makes much more sense. MLOK HARDWARE IS NOT INCLUDED.

Area 419 is always looking for ways to improve existing products when not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle ARCA saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction. If you have ever tried using a Barricade stop on an existing ARCA rail you’ve probably also seen it slide under much pressure.

Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*

Rail Features:

– Universal rail design is the same footprint as our previous rail. (There were two revisions to the hole spacing if you have a very early model your hole spacing may change)
– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp will not damage bags or your hands.
– 65 Locking positions available on the 14″ rail
– Rail is backwards compatible with standard Arca accessories but will not be locking without our clamp
– Serrated fixed rear barricade stop is same as before but now we include an extension plug to raise it by another 1/2″
– Rail is 14″ long giving you the entire length of the stock forend for attachments. The best part is it still only weighs in at a paltry 5.6oz
– Made to the RRS 1.5″ Dovetail Standard so you can be sure lever clamps will work
– No sharp edges. Every corner is radiused and every edge is chamfered on the machine. This takes longer to make but it is the only right way.
– While designed with Manners Composite Stocks in mind this rail accommodates a multitude of rifle and stock configurations that have an accessible front action screw and some sort of front attachment point(s).
– Spacers for rifle stocks with non-flat forends are available
– Designed to attach to the rifle up to 4 places for maximum strength and stability.
– Extends past the end of most rifle stocks allowing a further forward bipod attachment increasing stability.
– Type 3 Hard Coat anodized for additional durability.
– Made from 6061-T6 Aluminum
– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs
– Rail comes with one Remington 700-style action screws of extended length to fit the rail to the front action screw attachment point. Some trimming will likely be required.
– A 3/4″ paddle bit and drill press may be required for installation of tee-nuts depending on current rifle configuration. Tee nuts and hardware included.

Rail Weights:

14″: 156.03 Grams
12″: 111.5 Grams
10″: 95.2 Grams

The Area 419 ARCALOCK 14″ Universal Barricade Rail Kit provides a solid shooting platform interface for precision rifles. Featuring 65 locking positions and a proprietary clamp design that mechanically locks to prevent sliding under pressure, this rail accommodates various rifle and stock configurations with accessible front action screws. The kit includes the rail, clamp, barricade stop, and associated hardware.

Specs

Rail Length: 14 inches
Locking Positions: 65
Weight: 5.2 oz (without extension plug)
Dovetail Standard: RCS 1.5″ compatible
Clamp Design: 1/4 turn release mechanism
Compatibility: Atlas Bipods (factory hardware compatible)

Questions about fitment or availability? Give the shop a call and we’ll walk you through it.

For all those looking for the lightest smallest ARCALOCK rail on the market – here ya go. Weighing in at just 1.5oz this will fir forend hole spacings of 2″-3.5″ just like our extremely popular IBR. The rail will also come with t-nuts and hardware to allow you to install the rail closer to the magwell for tripod use.

MLOK HARDWARE NOT INCLUDED

These rails are made of 6061 billet aluminum and will be sold only in a black hardcoat anodized finish.

YOU MUST BE 18 OR OLDER TO ENTER

Specs