Carlsons Ported Bone Collector Turkey Choke Tubes feature a super tight, pattern tested constriction that throws extremely tight patterns with all shotshell ammunition loaded for turkey hunting including lead, nickel-plated, copperplated, bismuth, hevi-shot, tungsten, and TSS. A longer taper section to the constriction (parallel section of choke tube) insure tight patterns with less flyers. The Bone Collector Choke tubes are precision-machined from 17-4 heat treated stainless steel and feature a non-reflective matte black finish. Each choke tube constriction has been pattern tested and has thrown the best patterns with 4 through 10 shot. If you wish to use shot sizes larger than #4 shot, use a more open choke tube for optimum patterning. Remember to pattern your shotgun choke tube with the specific shot shell load you are going to be using. Different types and manufacturers of ammunition will throw different patterns from the same choke tube.
Carlsons Ported Bone Collector Turkey Choke Tubes feature a super tight, pattern tested constriction that throws extremely tight patterns with all shotshell ammunition loaded for turkey hunting including lead, nickel-plated, copperplated, bismuth, hevi-shot, tungsten, and TSS. A longer taper section to the constriction (parallel section of choke tube) insure tight patterns with less flyers. More pellets on target every shot! The Bone Collector Choke tubes are precision-machined from 17-4 heat treated stainless steel and feature a non-reflective matte black finish. Each choke tube constriction has been pattern tested and has thrown the best patterns with 4 through 10 shot. If you wish to use shot sizes larger than #4 shot, use a more open choke tube for optimum patterning. Remember to pattern your shotgun choke tube with the specific shot shell load you are going to be using. Different types and manufacturers of ammunition will throw different patterns from the same choke tube.
Carlsons Ported Bone Collector Turkey Choke Tubes feature a super tight, pattern tested constriction that throws extremely tight patterns with all shotshell ammunition loaded for turkey hunting including lead, nickel-plated, copperplated, bismuth, hevi-shot, tungsten, and TSS. A longer taper section to the constriction (parallel section of choke tube) insure tight patterns with less flyers. More pellets on target every shot! The Bone Collector Choke tubes are precision-machined from 17-4 heat treated stainless steel and feature a non-reflective matte black finish. Each choke tube constriction has been pattern tested and has thrown the best patterns with 4 through 10 shot. If you wish to use shot sizes larger than #4 shot, use a more open choke tube for optimum patterning. Remember to pattern your shotgun choke tube with the specific shot shell load you are going to be using. Different types and manufacturers of ammunition will throw different patterns from the same choke tube.
Carlsons Ported Bone Collector Turkey Choke Tubes feature a super tight, pattern tested constriction that throws extremely tight patterns with all shotshell ammunition loaded for turkey hunting including lead, nickel-plated, copperplated, bismuth, hevi-shot, tungsten, and TSS. A longer taper section to the constriction (parallel section of choke tube) insure tight patterns with less flyers. More pellets on target every shot! The Bone Collector Choke tubes are precision-machined from 17-4 heat treated stainless steel and feature a non-reflective matte black finish. Each choke tube constriction has been pattern tested and has thrown the best patterns with 4 through 10 shot. If you wish to use shot sizes larger than #4 shot, use a more open choke tube for optimum patterning. Remember to pattern your shotgun choke tube with the specific shot shell load you are going to be using. Different types and manufacturers of ammunition will throw different patterns from the same choke tube.
Carlsons Ported Bone Collector Turkey Choke Tubes feature a super tight, pattern tested constriction that throws extremely tight patterns with all shotshell ammunition loaded for turkey hunting including lead, nickel-plated, copperplated, bismuth, hevi-shot, tungsten, and TSS. A longer taper section to the constriction (parallel section of choke tube) insure tight patterns with less flyers. More pellets on target every shot! The Bone Collector Choke tubes are precision-machined from 17-4 heat treated stainless steel and feature a non-reflective matte black finish. Each choke tube constriction has been pattern tested and has thrown the best patterns with 4 through 10 shot. If you wish to use shot sizes larger than #4 shot, use a more open choke tube for optimum patterning. Remember to pattern your shotgun choke tube with the specific shot shell load you are going to be using. Different types and manufacturers of ammunition will throw different patterns from the same choke tube.
Carlson’s high quality accessory barrels are made for Remington 870 models. All barrels are constructed from certified ordinance grade 4140 steel with chrome lined bores. Vent rib models have a satin matte blue finish with red flourescent front sight and brass center bead. Each barrel comes with a Carlson choke tube, manufactured from 17-4 stainless steel. All of Carlson’s Remington 870 replacement barrels are threaded for the standard Rem Choke system. Enhance the versatility and performance of your shotgun with a Carlson’s replacement shotgun barrel. Fits Remington 870 12ga only. ***For Remington 870, 12 gauge, RIGHT HAND ONLY *** DOES NOT FIT REMINGTON TACTICAL 870
Carlson’s high quality accessory barrels are made for Remington 870 models. All barrels are constructed from certified ordinance grade 4140 steel with chrome lined bores. Vent rib models have a satin matte blue finish with red flourescent front sight and brass center bead. All 18 1/2″ barrels are non vent ribbed and have a ramped front sight with a matte finish. Each barrel comes with a Carlson choke tube, manufactured from 17-4 stainless steel except for the rifled choke tube models which are made from 304 high stress stainless steel, installed. All of our Remington 870 replacement barrels are threaded for the standard Rem Choke system. Enhance the versatility and performance of your shotgun with a Carlson’s replacement shotgun barrel. Fits Remington 870 12ga only. ***For Remington 870, 12 gauge, RIGHT HAND ONLY*** DOES NOT FIT REMINGTON TACTICAL 870
Core Series 12 GA Shotgun Choke Tube
Fits Benelli Crio/ Crio Plus (SBE2 SBE3 M2 & Other Models)
Close Range
For use with shot size BB-10 IN Steel Lead Bismuth TSS & Hevi-Shot.
#1 CR/IC – Close Range
- Lead Yardage 5-20
- Steel Yardage 15-30
CARLSONS Beretta/Benelli Mobil 12ga Close Range
Core Series 12 GA Shotgun Choke Tube
Fits most Remington Shotguns
Close Range
For use with shot size BB-10 IN Steel Lead Bismuth TSS & Hevi-Shot.
#1 CR/IC – Close Range
- Lead Yardage 5-20
- Steel Yardage 15-30
*Slugs may only be used through the IC/CR Choke
Fits most Winchester Browning Invector Mossberg Model 500 and Savage Shotguns
Close Range
For use with shot size BB-10 IN Steel Lead Bismuth TSS & Hevi-Shot.
#3 LR/Full – Long Range
- Lead Yardage 30-45
- Steel Yardage 40+
For use with Hevi-Shot Bismuth or lead this high performance choke tube has been specifically designed for the coyote hunter to deliver devastating downrange patterns upwards of 70 yards when shooting larger shot sizes. Produces very dense patterns when ultilizing T and Buckshot loads. Great for waterfowl and predator hunting.
Not for use with steel shot.
The Carlson's Coke Tubes Coyote Choke Tubes are made specifically with coyote hunters in mind allowing predator hunters to deliver devastatingly effective patterns at distances of 70 yards and more with larger sized shot. Made for use with Hevi-Shot Bismuth or lead the Carlsons Coyote Choke Tubes are high performance chokes that produce very dense patterns when utilizing T and Buckshot loads. The Carlson's Coyote Shotgun Choke Tubes are great for waterfowl and predator hunting and are available to fit a variety of shotgun models.
Note: these choke tubes are NOT FOR USE WITH STEEL SHOT!
The Carlson's Coke Tubes Coyote Choke Tubes are made specifically with coyote hunters in mind allowing predator hunters to deliver devastatingly effective patterns at distances of 70 yards and more with larger sized shot. Made for use with Hevi-Shot Bismuth or lead the Carlsons Coyote Choke Tubes are high performance chokes that produce very dense patterns when utilizing T and Buckshot loads. The Carlson's Coyote Shotgun Choke Tubes are great for waterfowl and predator hunting and are available to fit a variety of shotgun models.
Note: these choke tubes are NOT FOR USE WITH STEEL SHOT!
The Carlson's Coke Tubes Coyote Choke Tubes are made specifically with coyote hunters in mind allowing predator hunters to deliver devastatingly effective patterns at distances of 70 yards and more with larger sized shot. Made for use with Hevi-Shot Bismuth or lead the Carlsons Coyote Choke Tubes are high performance chokes that produce very dense patterns when utilizing T and Buckshot loads. The Carlson's Coyote Shotgun Choke Tubes are great for waterfowl and predator hunting and are available to fit a variety of shotgun models.
Note: these choke tubes are NOT FOR USE WITH STEEL SHOT!
The Carlson's Coke Tubes Coyote Choke Tubes are made specifically with coyote hunters in mind allowing predator hunters to deliver devastatingly effective patterns at distances of 70 yards and more with larger sized shot. Made for use with Hevi-Shot Bismuth or lead the Carlsons Coyote Choke Tubes are high performance chokes that produce very dense patterns when utilizing T and Buckshot loads. The Carlson's Coyote Shotgun Choke Tubes are great for waterfowl and predator hunting and are available to fit a variety of shotgun models.
Note: these choke tubes are NOT FOR USE WITH STEEL SHOT!
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
To fit Winchester Browning Invector Mossberg 500 Weatherby Pre 1993 Ruger Red Label. Winchester SX-2SX-3 & SXP use Browning Invector Plus tubes
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator® Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.
Carlson’s Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction. This design offers reduced pellet deformation less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.
The Cremator series has no size or speed restrictions with steel shot in any of the three constrictions. You also get all the benefits of an extended choke tube including a 25% longer parallel section for tighter and more dense patterns wrench-less installation quick removal and helps with muzzle protection. They are offered in your choice of ported or non-ported configurations. Like all of our tubes Carlson’s Cremator Series Choke Tubes are made in the U.S.A. carry a lifetime warranty and are precision-machined from heat-treated 17-4 stainless steel.
NOTE: Optima HP and Remington Pro Bore Long Range cannot be used with any steel shot larger than #2.