Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right hand guns. Features- machined from a solid block of top-grade billet 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both use a 7/64 Allen wrench. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end.
Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right hand guns. Features- machined from a solid block of top-grade billet 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both use a 7/64 Allen wrench. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end.
Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right hand guns. Features- machined from a solid block of top-grade billet 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both use a 7/64 Allen wrench. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end.
Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right hand guns. Features- machined from a solid block of top-grade billet 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both use a 7/64 Allen wrench. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end.
Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right hand guns. Features machined from a solid block of top-grade billet 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both use a 7/64 Allen wrench.
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum, and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Base screws are 6-48 X 1/4 long and ring screws are 6-40 X 5/8 long. Both use 7/64 Allen wrench. Mount fits both left and right hand firearms.
DNZ Game Reaper 2 Browning XBolt 30mm Medium Black
Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right handed guns. Features machined from 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Base screws are 8-40 X 1/4 long and use a 9/64 Allen wrench. Ring screws are 6-40 X 5/8 long and use a 7/64 Allen wrench.
Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right handed guns. Features machined from 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Base screws are 8-40 X 1/4 long and use a 9/64 Allen wrench. Ring screws are 6-40 X 5/8 long and use a 7/64 Allen wrench.
Game Reaper 2 Signature Series two piece scope mounts fit long and short actions, some super short actions, left and right hand guns. Features machined from a solid block of top-grade billet 6061 T6 aluminum, internal ring and base design allows for extra eye relief adjustment, reduces scope damage from tightening rings, no moving parts between the firearm and the scope, up to four times the threads of other mounts for absolute strength and security and absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight. Browning A Bolt 3 mounts are machined to accommodate 8-40 base screws. All Game Reaper 2 piece 30MM mounts are tactical meaning that the number of ring screws are 4 on each end of the mount. Some Savage Round Receiver Guns and Savage Axis Guns are drilled and tapped with 8-40 base screw holes and will fit the Browning A-Bolt 3 Game Reaper 2 piece mount. Base screws are 8-40 X 1/4 long and use a 9/64 Allen wrench. Ring screws are 6-40 X 5/8 long and use a 7/64 Allen wrench.
This DNZ Freedom Reaper Carry Handle Mount – AR15 is designed to mount directly to the carry handle of an AR-15. This is one very solid base with integral rings. Made from lightweight yet very strong aluminum this mount is only about one-third of the weight of conventional mounts so it will not throw off the balance of the weapon.
All of the hardware needed for mounting comes with the package and installation can be done in a matter of minutes.
- Precision machined from a solid block of top-grade billet aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- No moving parts between the firearm and the scope
- 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for
- absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
Made to align perfectly with the receiver of a rifle this DNZ Freedom Reaper Forward Ring Picatinny Rail Mount with 45DAR can be customized for a variety of firearms. This mount is 67% lighter than comparable mounts and is tough enough to handle the shock of recoil and extreme temperatures.
Made in the USA the DNZ Freedom Reaper Forward Ring Picatinny Rail Mount with 45DAR can be installed by the user and no modifications to the weapon are needed.
- Precision machined from a solid block of top-grade billet aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- No moving parts between the firearm and the scope
- 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
High quality is apparent with this DNZ Freedom Reaper Picatinny Ring Rail Mount. The piece is constructed to provide a secure fit that is easy to install on your firearm. The finish is black allowing for a cohesive look and the mount fits either left-handed or right-handed firearms.
The mount is designed to withstand heavy use and recoil providing for a secure platform to rest your scope. This stability will decrease the time you need to spend adjusting your sight.
Designed to eliminate misaligned rings that can damage a scope this DNZ Freedom Reaper Picatinny Rail Mount is one high-strength mount made for high-quality scopes. Anodized for longer life this mount is about one-third the weight of conventional mounts. Made with a rigid design there are no moving parts between the scope and the gun.
This mount has screws with 4 times the threads of comparable mounts and it withstands extremes in temperatures much better than steel mounts.
Available in long- and short-action models this DNZ Freedom Reaper Tactical Scope Mount – Remington. 700 LA RH is made to accommodate the Remington 700. This scope mount will also fit most 1-inch scope tubes. This right-hand mount is available in three heights: low medium and high.
Installed low this scope mount has a suggested rail to optical center of .980″. In the medium setting it has a suggested rail to optical center of 1.105″ and in high the suggested rail to optical center is 1.229″.
For Remington 700: Also fits the Remington model 721 and 722 & Bergara B14. Right-hand mount fits right hand firearms and left-hand mounts fit left hand firearms.
MOA Mounts are tapered down on front for long range shooting. Height will be about .03? lower on front ring than a standard mount.
Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8? long. Both use a 7/64? Allen wrench.
Some of the .338 Lapua receivers have been modified at the factory and have larger base screws. The size of them is 8-40 and will use a 9/64 Allen wrench. Check your gun and see because the mount will have to be modified. Choose Model 700 (8-40 screws) if your gun uses the larger 8-40 screws.
Short action ? Outside to outside of rings is 4.26? for standard ring mounts. Standard rings are .63? wide and have 2 ring screws per ring. Tactical rings are .80? wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86? 3.63? .60?. Height of mounts from top of receiver to centerline of scope tube is ? low .98? medium 1.11? and high 1.23?.
The Game Reaper DNZ Scope Mount Remington is a selection of several scope mounts including the Remington 700 783 Model 7 7400 7600 7615 750 and Genesis. Each of these mounts will function for either right- or left-hand firearms providing a great deal of versatility.
The mount itself is precision machined using top-grade billet aluminum originating from a solid block a process that minimizes seams making the mount sturdier. The mount is also able to withstand extreme temperatures and absorb shock to a greater degree than steel mounts despite weighing less.
The DNZ Scope Mount Ruger .10/.22 1
Image may not be representative of color or style.
The DNZ Scope Mount Ruger .10/.22 1
Image may not be representative of color or style.
The DNZ Scope Mount Ruger .10/.22 1
Image may not be representative of color or style.
An excellent option for mounting optics accessories on almost any type of rifle this DNZ Scope Mount – Ruger 10/22 1″ Medium is made from a solid block of high-grade aluminum. This right-hand mount has a dimension from the outside of the back ring to the outside of the front ring of 4.29 inches.
This medium mount has rings that are 0.625 inches wide and the black finish looks good on the rifle and will not reflect light.
Every DNZ scope mount is precision machined in North Carolina from top grade solid billet aluminum. Ultralight with maximum shock absorption there are no movable parts between rifle and scope. simply put DNZ machines some of the finest most accurate scope mounts in the world.
Ruger American (centerfire):
Mount fits both left and right hand firearms.
Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both screws use a 7/64? Allen wrench.
Short action ? Outside to outside of rings is 3.97?. Standard rings are .63? wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86? 3.01? .86?. Height of mounts from top of receiver to centerline of scope tube is – low .92? medium 1.05? and high 1.17?.
Long action ? Outside to outside of rings is 4.49?. Standard rings are .63? wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86? 3.54? .86?. Height of mounts from top of receiver to centerline of scope tube is – low .92? medium 1.05? and high 1.17?.
This DNZ Scope Mount – Browning A-Bolt Long Action is an option for a number of different rifle types. Made in the USA from a solid and high-quality block of aluminum this mount is lighter than its steel counterparts.
Rings are 0.625 inches wide and the dimension from the outside of the back ring to the outside of the front ring is just over 5 inches. A high mount the DNZ Scope Mount – Browning A-Bolt Long Action has a black finish that will not reflect light.