YOU MUST BE 18 OR OLDER TO ENTER

The Game Reaper DNZ Scope Mount Remington is a selection of several scope mounts including the Remington 700 783 Model 7 7400 7600 7615 750 and Genesis. Each of these mounts will function for either right- or left-hand firearms providing a great deal of versatility.

The mount itself is precision machined using top-grade billet aluminum originating from a solid block a process that minimizes seams making the mount sturdier. The mount is also able to withstand extreme temperatures and absorb shock to a greater degree than steel mounts despite weighing less.

The Game Reaper DNZ Scope Mount Remington is a selection of several scope mounts including the Remington 700 783 Model 7 7400 7600 7615 750 and Genesis. Each of these mounts will function for either right- or left-hand firearms providing a great deal of versatility.

The mount itself is precision machined using top-grade billet aluminum originating from a solid block a process that minimizes seams making the mount sturdier. The mount is also able to withstand extreme temperatures and absorb shock to a greater degree than steel mounts despite weighing less.

The Game Reaper DNZ Scope Mount Remington is a selection of several scope mounts including the Remington 700 783 Model 7 7400 7600 7615 750 and Genesis. Each of these mounts will function for either right- or left-hand firearms providing a great deal of versatility.

The mount itself is precision machined using top-grade billet aluminum originating from a solid block a process that minimizes seams making the mount sturdier. The mount is also able to withstand extreme temperatures and absorb shock to a greater degree than steel mounts despite weighing less.

The Game Reaper DNZ Scope Mount Remington is a selection of several scope mounts including the Remington 700 783 Model 7 7400 7600 7615 750 and Genesis. Each of these mounts will function for either right- or left-hand firearms providing a great deal of versatility.

The mount itself is precision machined using top-grade billet aluminum originating from a solid block a process that minimizes seams making the mount sturdier. The mount is also able to withstand extreme temperatures and absorb shock to a greater degree than steel mounts despite weighing less.

The Game Reaper DNZ Scope Mount Remington is a selection of several scope mounts including the Remington 700 783 Model 7 7400 7600 7615 750 and Genesis. Each of these mounts will function for either right- or left-hand firearms providing a great deal of versatility.

The mount itself is precision machined using top-grade billet aluminum originating from a solid block a process that minimizes seams making the mount sturdier. The mount is also able to withstand extreme temperatures and absorb shock to a greater degree than steel mounts despite weighing less.

This DNZ Scope Mount – Savage is available to mount to left- and right-handed firearms and is made for a custom fit to align perfectly with the receiver of a firearm. Made from high-quality billet aluminum this mount is 67% lighter than comparable steel mounts.

This DNZ Scope Mount – Savage also absorbs shock and can handle extremes in temperature better than a steel mount. Made in the USA this mount has no moving parts between the scope and the firearm.

This DNZ Scope Mount – Savage is available to mount to left- and right-handed firearms and is made for a custom fit to align perfectly with the receiver of a firearm. Made from high-quality billet aluminum this mount is 67% lighter than comparable steel mounts.

This DNZ Scope Mount – Savage also absorbs shock and can handle extremes in temperature better than a steel mount. Made in the USA this mount has no moving parts between the scope and the firearm.

This DNZ Scope Mount – Savage is available to mount to left- and right-handed firearms and is made for a custom fit to align perfectly with the receiver of a firearm. Made from high-quality billet aluminum this mount is 67% lighter than comparable steel mounts.

This DNZ Scope Mount – Savage also absorbs shock and can handle extremes in temperature better than a steel mount. Made in the USA this mount has no moving parts between the scope and the firearm.

Made 67% lighter than conventional steel mounts this DNZ Scope Mount – TC Encore/Omega 1″ Medium is precisely constructed from high-grade billet aluminum. This mount is 67% lighter than a steel mount yet very durable and reliable.

This DNZ Scope Mount can handle extremes in temperatures better than steel mounts. Precision socket head caps add to the strength and security of this high-quality product. This mount also allows for perfect alignment with the receiver of a firearm.

Made from high-quality billet aluminum this DNZ Scope Mount – Tikka T3 is made in the USA and is custom made to fit many types of firearms and provide for perfect alignment with the receiver of the firearm. This mount is 67% lighter than a steel mount yet strong and more durable.

There are no moving parts between the scope and the firearm ensuring reliability. Made shockproof to take the rigors of heavy use and recoil this mount can also better withstand extremes in temperatures than conventional steel mounts.

The DNZ Winchester Scope Mount comes in four different variations to fit different Winchester models. Every model is machined with a one-piece design to ensure pinpoint accuracy and that there are no moving parts between your scope and your weapon.

The DNZ Winchester Scope Mount can be installed quickly and easily with no tools required – its unique design even eliminates the need for windage screws. This scope mount features a design that ensures perfect ring alignment with no lapping needed – the placement of the rings even allows for extra eye relief adjustment.

The DNZ Winchester Scope Mount comes in four different variations to fit different Winchester models. Every model is machined with a one-piece design to ensure pinpoint accuracy and that there are no moving parts between your scope and your weapon.

The DNZ Winchester Scope Mount can be installed quickly and easily with no tools required – its unique design even eliminates the need for windage screws. This scope mount features a design that ensures perfect ring alignment with no lapping needed – the placement of the rings even allows for extra eye relief adjustment.

The DNZ Winchester Scope Mount comes in four different variations to fit different Winchester models. Every model is machined with a one-piece design to ensure pinpoint accuracy and that there are no moving parts between your scope and your weapon.

The DNZ Winchester Scope Mount can be installed quickly and easily with no tools required – its unique design even eliminates the need for windage screws. This scope mount features a design that ensures perfect ring alignment with no lapping needed – the placement of the rings even allows for extra eye relief adjustment.

DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. It is 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security.This model is compatible with Ruger 10/22 left and right hand rifles and has 1″ rings with a black matte finish and a high mount height.

Weatherby Mark V standard receiver: Look at hole to hole dimensions below before ordering. Your firearm might be made on a different receiver. Mounts fit right hand firearms. Base screws are 6-48 X 1/4? long and ring screws are 6-40 X 5/8? long. Both screws use a 7/64? Allen wrench. Outside to outside of rings is 4.44?. Standard rings are .63? wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86? 4.28? .60?. Height of mounts from top of receiver to centerline of scope tube is – low .94? medium 1.06? and high 1.19?.

The Weight of most all Game Reaper 2 mounts are 2 to 3 ounces. Depends on height style and size. Material is 6061T6 Aluminum. For Browning A-Bolt 3 Savage All Round Savage Axis.

Browning A Bolt 3 mounts are machined to accommodate 8-40 base screws. Some Savage Round Receiver Guns and Savage Axis Guns are drilled and tapped with 8-40 base screw holes and will fit the Browning A-Bolt 3 Game Reaper 2 piece mount. Please check your gun to make sure what size holes are in the receiver before you order.

Base screws are 8-40 x 1/4″ long and use a 9/64 Allen wrench. Ring screws are 6-40 x 5/8″ long and use a 7/64 Allen wrench. All Game Reaper 2 piece 30mm mounts are tactical meaning that the number of ring screws are 4 on each end of the mount.

Tactical rings are .80″ wide.

These will accommodate left or right handed and short or long action guns.

Height of mounts from top of receiver to centerline of scope tube is – low .94″ medium 1.06″ and High 1.19″.

• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle receiver
• No moving parts between the firearm and the scope
• 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Made in the USA

This DNZ 2-Piece Scope Mount – Remington .700 is made from high-grade aluminum and weighs only about one-third of what a steel ring base combo does. Made to be tough and durable this mount is easy to install and does not require any special tools.

This mount has 4 times the amount of threads as a conventional mount. This system takes away the need to pick a separate ring and base which over time have a tendency to become loose. This is a solid mount for a Remington .700 that will also look great on it.

Fits All Browning Bar & Long Action BLR & Benelli R1 Short Action BLR Models. Action: All Bar & Long Action BLR & Benelli R1.

• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle receiver
• No moving parts between the firearm and the scope
• 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Made in the USA

Browning BAR and Long action BLR: All BAR actions use the same mount. This mount also fits the long action BLR. Base screws are 6-48 X 1/4″ long and ring screws are 6-40 X 5/8″. Both use 7/64 Allen wrench. Outside to outside of rings is 4.24″. Rings are .63″ wide. 4 Hole to hole spacing dimensions are .50″ 3.19″ .50″. Height of mounts from top of receiver to centerline of scope tube is – low .94″ medium 1.06″ and high 1.19″. Mount fits both left and right hand firearms. Same mount used on a Benelli R1 rifle.

• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle receiver
• No moving parts between the firearm and the scope
• 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Made in the USA

Browning X Bolt: Base screws are 6-48 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Both screws use 7/64 Allen wrench. Super Short action ? Outside to outside of rings is 3.79″. Rings are .63″ wide. 4 Hole to hole spacing dimensions are .70″ 2.82″ .70″. Height of mounts from top of receiver to centerline of scope tube is ? low .94″ medium 1.06″ and high 1.19″. Mount fits right hand firearms. Long action ? Outside to outside of rings is 4.58″. Standard rings have 2 screws per ring and rings are .63″ wide. Tactical rings have 4 screws per ring and are .80″ wide. 4 Hole to hole spacing dimensions are .70″ 3.69″ .70″. Height of mounts from top of receiver to centerline of scope tube is ? low .94″ medium 1.06″ and high 1.19″. Mount fits right hand firearms.

• CVA Rifle (All 2010 and newer break open black powder barrels and all years of center fire rifle barrels)/li>
• Precision machined from a solid block of top-grade billet aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
• No moving parts between the firearm and the scope
• 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Base screws are 8-40 X 1/4? long. Ring screws are 6-40 X 5/8? long. Base screws use a 9/64? Allen wrench and ring screws use a 7/64? Allen wrench
• Outside to outside of rings is 3.92?. Rings are .63? wide. 4 Hole to hole spacing dimensions are .86? 79? .86?. Height of mounts from top of barrel to centerline of scope tube is ? low 1.00? medium 1.13? high 1.25? and X High 1.38?
• Made in the USA

• CVA Rifle (All 2010 and newer break open black powder barrels and all years of center fire rifle barrels)/li>
• Precision machined from a solid block of top-grade billet aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
• No moving parts between the firearm and the scope
• 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Base screws are 8-40 X 1/4? long. Ring screws are 6-40 X 5/8? long. Base screws use a 9/64? Allen wrench and ring screws use a 7/64? Allen wrench
• Outside to outside of rings is 3.92?. Rings are .63? wide. 4 Hole to hole spacing dimensions are .86? 79? .86?. Height of mounts from top of barrel to centerline of scope tube is ? low 1.00? medium 1.13? high 1.25? and X High 1.38?
• Made in the USA