YOU MUST BE 18 OR OLDER TO ENTER

DNZ’s Game Reaper integral mount combines the base and rings in a single lightweight piece with 67% less weight than comparable mounts and four times the thread count for absolute strength. The internal ring design permits extra eye relief adjustment while eliminating windage screws that can loosen.

Specs

• Fits: Marlin 1894, 1895, 336, XLR, flat-top Henry models
• Type: Integral one-piece mount
• Ring Width: .63″
• Screws per Ring: 2 socket-head cap
• Height: Medium 1.06″, High 1.19″ to centerline
• Material: Aluminum with stainless steel option

Questions about fitment or availability? Give the shop a call and we’ll walk you through it.

• Fits the Remington model 700 721 and 722 & Bergara B14. Right hand mount fits right hand firearms and left hand mounts fit left hand firearms
• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
• No moving parts between the firearm and the scope
• 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Made in the USA

Long action – Outside to outside of rings is 4.50?. Standard rings are .63? wide and have 2 ring screws per ring. 4 Hole to hole spacing dimensions are .86? 3.54? .86?. Height of mounts from top of receiver to centerline of scope tube is – low .92? medium 1.05? and high 1.17?. Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64? Allen wrench.

Fits the Remington model 700 721 and 722 & Bergara B14. Right hand mount fits right hand firearms and left hand mounts fit left hand firearms

• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
• No moving parts between the firearm and the scope
• 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Made in the USA

Short action – Outside to outside of rings is 4.26″ for standard ring mounts. Standard rings are .63? wide and have 2 ring screws per ring. Tactical rings are .80″ wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86″ 3.63″ .60″. Height of mounts from top of receiver to centerline of scope tube is ? low .98″ medium 1.11? and high 1.23″. Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8″ long. Both use a 7/64″ Allen wrench.

Fits the Remington model 700 721 and 722 & Bergara B14. Right hand mount fits right hand firearms and left hand mounts fit left hand firearms

• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
• No moving parts between the firearm and the scope
• 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
• Made in the USA

Short action – Outside to outside of rings is 4.26? for standard ring mounts. Standard rings are .63? wide and have 2 ring screws per ring. Tactical rings are .80? wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86? 3.63? .60?. Height of mounts from top of receiver to centerline of scope tube is ? low .98? medium 1.11? and high 1.23?. Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64? Allen wrench.

Fits the Remington model 700 721 and 722 & Bergara B14. Right hand mount fits right hand firearms and left hand mounts fit left hand firearms. MOA Mounts are tapered down on front for long range shooting. Height will be about .03? lower on front ring than a standard mount.

• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
• No moving parts between the firearm and the scope
• 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weightMade in the USA

Long action ? Outside to outside of rings is 4.62? for standard ring mounts. Standard rings are .63? wide and have 2 ring screws per ring. Tactical rings are .80? wide and have 4 ring screws per ring. 4 Hole to hole spacing dimensions are .86? 4.48? .60?. Height of mounts from top of receiver to centerline of scope tube is ? low .98? medium 1.11? and high 1.23?. Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64? Allen wrench.

DNZ Game Reaper Mount Savage All Round Receiver Offset Rings High Long Action Fits Savage Round Receiver 2004 and newer) (Model 1011121416110111112114116212220):

• Mount fits both left and right hand firearms.
• Receiver is rounded on front and back of receiver where mounts attach.
• MOA mounts are tapered down on front for long range shooting. Height will be about .03? lower on front ring than a standard mount.
• Base screws are 6-48 X 1/4? long and ring screws are 6-40 X 5/8? long. Both screws use a 7/64? Allen wrench.
• Some of the Stealth models and .338 Lapua receivers have been modified at the factory and have larger base screws. The size of them is 8-40 and will us a 9/64 Allen wrench. Check your gun and see because the mount will have to be modified. We charge $40 to modify the mount and we include the larger screws.
• Short action ? Outside to outside of rings is 4.36?. Standard rings are .63? wide and have 2 ring screws per ring. Tactical rings are .80? wide and have 4 screws per ring. 4 Hole to hole spacing dimensions are .86? 3.94? .86?. Height of mounts from top of receiver to centerline of scope tube is ? low .92? medium 1.05? and high 1.17?.
• Long action ? Outside to outside of rings is 5.06?. ( ***Offset ring mounts with OS for offset on end of part number are 4.42? outside to outside of rings for shorter tube scopes.*** Part 18200OS medium and 12200OS high ) Standard rings are .63? wide and have 2 ring screws per ring. Tactical rings are .80? wide and have 4 screws per ring. 4 Hole to hole spacing dimensions are .86? 4.63? .86?. Height of mounts from top of receiver to centerline of scope tube is ? low .92? medium 1.05? and high 1.17?.

NOTE: With the new Nikon Prostaff P3 Shotgun scope you will need the HIGH 12200OS Mount. The focus ring is larger and you have to have a taller mount to keep it off the base.