This DNZ 2-Piece Scope Mount – Remington .700 is made from high-grade aluminum and weighs only about one-third of what a steel ring base combo does. Made to be tough and durable this mount is easy to install and does not require any special tools.
This mount has 4 times the amount of threads as a conventional mount. This system takes away the need to pick a separate ring and base which over time have a tendency to become loose. This is a solid mount for a Remington .700 that will also look great on it.
Hunt Masters signature series two piece scope mounts :
- Fits long and short actions some super short actions – left and right hand guns
- Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
- Each ring and base is machined from a solid block of top-grade billet aluminum
- Internal ring and base design allows for extra eye relief adjustment
- Eliminates or reduces scope damage from tightening rings
- Approximately 1/3 the weight of steel
- Eliminates the need for windage screws that can work loose and cause problems
- No moving parts between the firearm and the scope
- Up to four times the threads of other mounts for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
Browning X Bolt (fits all action lengths):
- Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
- Hole spacing dimensions on front mount and back mount are .70?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – low .94? medium 1.06? and High 1.19?.
- Marlin XL7 XS7 Winchester 70 (fits Long action WSM and Short actions):
- Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
- Hole spacing dimensions on front and back mount is .86?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is ? low .92? medium 1.05? and High 1.17?.
- 2 Screws.
- Marlin XL7 XS7 Winchester 70 (fits Long action WSM and Short actions):
- Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
- Hole spacing dimensions on front and back mount is .86?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is ? low .92? medium 1.05? and High 1.17?.
- 2 Screws.
- Marlin XL7 XS7 Winchester 70 (fits Long action WSM and Short actions):
- Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
- Hole spacing dimensions on front and back mount is .86?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is ? low .92? medium 1.05? and High 1.17?.
- 2 Screws.
DNZ Savage Flatback Receiver (Fits 2003 and older long and short actions) – Front of receiver is rounded and back is flat where mounts attach. Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
Hole spacing dimensions on front and back mount are .86?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is ? low .92? medium 1.05? and High 1.17?.
2 screws per ring.
Made to fit the line of Savage round receiver guns this DNZ 2-Piece Scope Mount – Savage Round Receiver 30mm is rounded on the front and in the rear of the receiver ejection opening. This mount is also compatible with the Savage Axis and the Edge as well as the Stevens 200 rounded receiver guns.
With four screws per ring the DNZ 2-Piece Scope Mount – Savage Round Receiver is a low mount for long and short actions.
Precisely made from a solid block of aluminum this DNZ 2-Piece Scope Mount – TC Venture 30mm is one rugged mount that comes in your choice of three heights: low medium and high. This mount weighs about one-third of what a steel mount does and it can be mounted easily with no special tools required.
The hardened grade eight screws feature 4 times more threads than a conventional mount. With this configuration there is no need to select a separate ring and base which will become loose with regular use over time.
Precisely made from a solid block of aluminum this DNZ 2-Piece Scope Mount – TC Venture 30mm is one rugged mount that comes in your choice of three heights: low medium and high. This mount weighs about one-third of what a steel mount does and it can be mounted easily with no special tools required.
The hardened grade eight screws feature 4 times more threads than a conventional mount. With this configuration there is no need to select a separate ring and base which will become loose with regular use over time.
This DNZ 2-Piece Scope Mount – Remington .700 is made from high-grade aluminum and weighs only about one-third of what a steel ring base combo does. Made to be tough and durable this mount is easy to install and does not require any special tools.
This mount has 4 times the amount of threads as a conventional mount. This system takes away the need to pick a separate ring and base which over time have a tendency to become loose.
Fits Howa 1500 Mossberg 100ATR 4X4 Patriot MVP Weatherby Vanguard Remington 700721722725 (fits all action lengths): Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench. Hole spacing dimensions on front mount is .86? and on back mount it is .60?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is ? X low .86 low .98? medium 1.10? and High 1.23?.
- Hunt Masters signature series two piece scope mounts
- Fits long and short actions some super short actions ? left and right hand guns
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- Each ring and base is machined from a solid block of top-grade billet aluminum
- Internal ring and base design allows for extra eye relief adjustment
- Eliminates or reduces scope damage from tightening rings
- Approximately 1/3 the weight of steel
- Eliminates the need for windage screws that can work loose and cause problems
- No moving parts between the firearm and the scope
- Up to four times the threads of other mounts for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
This DNZ 2-Piece Scope Mount – Remington .700 is made from high-grade aluminum and weighs only about one-third of what a steel ring base combo does. Made to be tough and durable this mount is easy to install and does not require any special tools.
This mount has 4 times the amount of threads as a conventional mount. This system takes away the need to pick a separate ring and base which over time have a tendency to become loose.
Fits Howa 1500 Mossberg 100ATR 4X4 Patriot MVP Weatherby Vanguard Remington 700721722725 (fits all action lengths): Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench. Hole spacing dimensions on front mount is .86? and on back mount it is .60?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is ? X low .86 low .98? medium 1.10? and High 1.23?.
- Hunt Masters signature series two piece scope mounts
- Fits long and short actions some super short actions ? left and right hand guns
- Custom made to fit each type of firearm and align perfectly with your rifle?s receiver
- Each ring and base is machined from a solid block of top-grade billet aluminum
- Internal ring and base design allows for extra eye relief adjustment
- Eliminates or reduces scope damage from tightening rings
- Approximately 1/3 the weight of steel
- Eliminates the need for windage screws that can work loose and cause problems
- No moving parts between the firearm and the scope
- Up to four times the threads of other mounts for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
This DNZ 2-Piece Scope Mount is built to fit TC Venture 1
Image may not be representative of color or style.
Browning A Bolt Sako A7 Steyr (fits long and short actions):
Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench.
Hole spacing dimensions on front mount and back mount are .86?. Both mounts are the same part. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is ? low .94? medium 1.06? and High 1.19?.
- 2 piece scope mounts
- Long and short action guns
- Medium tactical mount
- 1″ scope tube
- Black
- Left or right hand
- 4 screws per ring
CVA Rifles (All 2010 and newer break open black powder barrels and all years of center fire rifle barrels). Outside to outside of rings is 3.92”. Rings are .63" wide. 4 Hole to hole spacing dimensions are .86" 79" .86". Height of mounts from top of barrel to centerline of scope tube is – low 1.00" medium 1.13" high 1.25" and X High 1.38".
- Precision machined from a solid block of top-grade billet aluminum
- Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
- No moving parts between the firearm and the scope
- 67 percent lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
- Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
- Made in the USA
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Receiver is rounded on front and back of receiver where mounts attach.
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Receiver is rounded on front and back of receiver where mounts attach.
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Receiver is rounded on front and back of receiver where mounts attach.
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Receiver is rounded on front and back of receiver where mounts attach.
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Receiver is rounded on front and back of receiver where mounts attach.
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Receiver is rounded on front and back of receiver where mounts attach.
DNZ Products Freedom Reaper Picatinny Rail that will mount to the top of your receiver. Fits Savage All Round receiver short action. Base screws are 6-48 X 1/4″ long and screws use a 7/64″ Allen wrench. These rails are made to 1913 Mil specs.
DNZ’s Game Reaper is precision machined from a solid block of top-grade billet aluminum and is custom made to fit each type of firearm and align perfectly with your rifle receiver with no moving parts between the firearm and the scope. The Game Reaper absorbs shock and withstands temperature extremes better than steel mounts. Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both screws use a 7/64 Allen wrench.
DNZ’s Freedom Reaper Picatinny Rails will mount to the top of your receiver. These rails are made to 1913 Mil specs. Material is 6061 T6 Aluminum. Base screws are 6-48 X 1/4″ long and screws use a 7/64″ Allen wrench.
DNZ’s Freedom Reaper Picatinny Rails will mount to the top of your receiver. These rails are made to 1913 Mil specs. Base screws are 6-48 X 1/4″ long and screws use a 7/64″ Allen wrench.