YOU MUST BE 18 OR OLDER TO ENTER

• AK-47 Weaver Style Tri-Rail Mount and Receiver Cover
• Replaces existing AK-47 receiver cover. Fits AKM pattern rifles with a stamped receiver (7.62X39 5.54X39 .223)
• The Mount provides Three Rails for mounting and Optic onto the top rail and accessories on the side rails like a Flashlight and/or Laser
• The two side rails can be mounted in several positions for mounting flexability they are also removable
• Adjustable front tab and two rear set screws are provided for a secure fit
• Aluminum (Rail) and Steel Construction (Receiver Cover)
• Length: 9.4"
• Weight: 11.2 oz

This single point bungee sling is built with Heavy duty bungee cord for complete comfort and stability. It has a Steel QD push button sling swivel attachment point for quick installation and removal.

The Flashlight & Green Laser can be quickly switched back and forth from a Laser to a Flashlight by just changing the front assemblies. The Flashlight & Green Laser is a super bright green laser or a bright 150 lumens Flashlight. With a Quick Detachable Weaver style mount, that can quickly install and remove the powerful green laser or Flashlight in seconds and mount it onto virtually any firearms without the use of tools. It has precise windage and elevation adjustments to keeps shots on target. Includes adjustment tool.

45 Degree offset folding front sight perfect for AR15 shooters looking for offset iron sights. Fits onto receiver height Weaver Picatinny MIL-STD 1913 type rails. The A2 front sight post is fully adjustable for elevation. Front sight folds forward flat for a lower profile. Weight: 2.4 oz.

45 Degree offset folding Rear sight perfect for AR15 shooters looking for offset iron sights
Fits onto receiver height Weaver Picatinny MIL-STD 1913 type rails
The A2 Dual Aperature (Large & Small) Rear sight is fully adjustable for windage also with a Large windage knob
Rear sight folds back flat for a lower profile and will fit under the majority of scopes out in the market
Weight: 2.6 oz.

• 30mm AR-15 Scope mount with Quick Release Mount
• Allows you to quickly mount a 30mm or 1″ scope onto your Picatinny Rail
• Front Fixed Cantilever Ring with an adjustable for length Rear Ring Rear Ring is also removable
• Includes 1″ inserts. Mount works with both 30mm and 1″ scopes
• Black Anodized Aluminum Construction
• Length: 4.7″
• Weight: 6.1 oz

• GEN2 AR15 3/4″ Riser raises your Picatinny rail platform by 3/4″. Helps with getting low profile optic mounts to a more comfortable cheek rest height and shooting position.
• GEN2 model has a new updated shape next generation Locking Quick Release mount with shorter lever and is lighter than the previous version.
• Mounts via a Locking Quick Release mount onto your Picatinny rail of your AR15/M4 receiver. You can quickly attach and remove your optic from your receiver and maintain your zero.
• There is a see through channel below the rail to keep the mount lighter and for some firearm types it may allow you to use some factory iron sights.
• Length: 5.3″
• Weight: 4.2 oz

Features:

• AR15 Armorer's Barrel Wrench. Combo tool with plenty of features to work upgrade your AR-15/ M4/ M16
• Barrel Wrench for GI Barrel Nut
• A1 & A2 Flash Suppressor wrenchs
• Older Single Pin and the newer M4 Collapsable Stock Castle Nut wrenchs
• Flat Blade Screw Driver
• 1/2" Drive Ratchet Compatible
• Steel Construction
• Length: 12.7"
• Weight: 20.2 oz
• NcSTAR Patented Design: US Pat. # D598723

Features:

• AR15 Armorer's Barrel Wrench – Generation 2. Combo tool with many New Features/Tools to work and upgrade your AR-15/ M4/ M16
• Barrel Wrench for GI Barrel Nut Free-Float Barrel Nuts with GI spacing DD Barrel Nuts and YHM ( 1¾") Spanner wrench
• A2 (¾") and 5/8 Flash Suppressor wrench M4 Collapsable Stock Castle Nut wrench A2 Buffer Tube Wrench
• Flat Blade Screw Driver for A2 Buttstock Plate 1/2" and 3/8" Drive Compatible Lower Receiver Push Pin Tool
• 1/4" Hex Bit Drive Socket 1911 Barrel Bushing Wrench and a Tactical Bottle Opener
• All the Tools are Clearly Labeled.
• Steel Construction
• Length: 12.9"
• Weight: 13.0 oz
• NcSTAR Patented Design: US Pat. # D703502

Features:

• AR-15 Flip-Up Front Sight – Back-Up Iron Sight
• Designed to be Mounted on Top of Gas Blocks with Picatinny Rails lower than the AR15 Receiver Rail
• Flip-Up A2 Front Sight Post folds down out of view of your optics when not in use
• The A2 front sight post is fully adjustable for elevation
• Aluminum and Steel Construction
• Length: 1.2” (extended) 2.1” (folded)
• Weight: 3.4 oz

• AR15 Tri-Rail Mount/Riser for Flat-Top receivers
• Mounts onto the AR-15 flast-top receiver directly onto the Picatinny rail
• Provides a raised platform for mounting Optics higher for a more comfortable shooting position
• Two Side rails for attaching accessories like a Flashlight & Laser
• Black Anodized Aluminum Construction
• Length: 5.2 inches
• Weight: 7.8 oz

The Double Pistol Range Bags main pistol compartment can fit two standard full framed semi-auto pistols. The compartment floor is lined with loop fasteners and comes with four hook & loop straps to secure the pistols in place. There are two large flaps that close over the pistols to help secure them in place and to protect them from being scratched. The 9″ long magazine pouches run nearly the full width of the bag with hook & loop flaps on both ends. This allows you to use sub-compact, double stack standard capacity magazines, and even 30+ extended magazines. The mag pouches can hold up to 10 standard capacity double stack magazines. There are also extra loop fasteners on the mag pouches for name tape or moral patches. Elastic loops for holding additional mags, shooting glasses, etc. Two slot pockets to hold a pen/marker or tools. Large heavy duty zippers on the main compartment with lockable metal zipper pulls (padlock not included). Heavy Duty padded carry handles and an adjustable shoulder strap with quick connects are included. There is also an external zippered compartment to hold paperwork, your car keys, etc. On the back side there is a 5″ X 3″ loop fastener patch to attach a name tape or moral patches.

The Double Pistol Range Bags main pistol compartment can fit two standard full framed semi-auto pistols. The compartment floor is lined with loop fasteners and comes with four hook & loop straps to secure the pistols in place. There are two large flaps that close over the pistols to help secure them in place and to protect them from being scratched. The 9″ long magazine pouches run nearly the full width of the bag with hook & loop flaps on both ends. This allows you to use sub-compact, double stack standard capacity magazines, and even 30+ extended magazines. The mag pouches can hold up to 10 standard capacity double stack magazines. There are also extra loop fasteners on the mag pouches for name tape or moral patches. Elastic loops for holding additional mags, shooting glasses, etc. Two slot pockets to hold a pen/marker or tools. Large heavy duty zippers on the main compartment with lockable metal zipper pulls (padlock not included). Heavy Duty padded carry handles and an adjustable shoulder strap with quick connects are included. There is also an external zippered compartment to hold paperwork, your car keys, etc. On the back side there is a 5″ X 3″ loop fastener patch to attach a name tape or moral patches.

The Double Pistol Range Bags main pistol compartment can fit two standard full framed semi-auto pistols. The compartment floor is lined with loop fasteners and comes with four hook & loop straps to secure the pistols in place. There are two large flaps that close over the pistols to help secure them in place and to protect them from being scratched. The 9″ long magazine pouches run nearly the full width of the bag with hook & loop flaps on both ends. This allows you to use sub-compact, double stack standard capacity magazines, and even 30+ extended magazines. The mag pouches can hold up to 10 standard capacity double stack magazines. There are also extra loop fasteners on the mag pouches for name tape or moral patches. Elastic loops for holding additional mags, shooting glasses, etc. Two slot pockets to hold a pen/marker or tools. Large heavy duty zippers on the main compartment with lockable metal zipper pulls (padlock not included). Heavy Duty padded carry handles and an adjustable shoulder strap with quick connects are included. There is also an external zippered compartment to hold paperwork, your car keys, etc. On the back side there is a 5″ X 3″ loop fastener patch to attach a name tape or moral patches.

The Double Pistol Range Bags main pistol compartment can fit two standard full framed semi-auto pistols. The compartment floor is lined with loop fasteners and comes with four hook & loop straps to secure the pistols in place. There are two large flaps that close over the pistols to help secure them in place and to protect them from being scratched. The 9″ long magazine pouches run nearly the full width of the bag with hook & loop flaps on both ends. This allows you to use sub-compact, double stack standard capacity magazines, and even 30+ extended magazines. The mag pouches can hold up to 10 standard capacity double stack magazines. There are also extra loop fasteners on the mag pouches for name tape or moral patches. Elastic loops for holding additional mags, shooting glasses, etc. Two slot pockets to hold a pen/marker or tools. Large heavy duty zippers on the main compartment with lockable metal zipper pulls (padlock not included). Heavy Duty padded carry handles and an adjustable shoulder strap with quick connects are included. There is also an external zippered compartment to hold paperwork, your car keys, etc. On the back side there is a 5″ X 3″ loop fastener patch to attach a name tape or moral patches.

This black tactical vest is perfect for any situation, weather you are on the range, or simulating a combat situation. Featuring 3 adjustable side straps to make sure you get a secure fit, along with a heavy duty zipper and 2 adjustable quick fasten buckles to insure no rotation, but still provide comfort. The vest also includes a pistol belt for necessary accessories.

Constructed of tough PVC material with a large heavy duty zipper. Exterior and interior compartments for extra storage space. Durable carry handles.

This rifle case features high density foam inner padding, heavy duty metal double zippers, metal d-rings, heavy duty carry handle strap with hook and loop flap and a I.D. holder on the outside of the case.

NcStar’s VISM series Rifle Case is constructed of tough PVC material and features high density foam inner padding for superior firearm protection. The outside of this 13″ (OAH) case has an I.D. holder on one side and covered pockets on the other to store extra magazines and weapon accessories. The heavy duty hardware includes metal double zippers, metal D-rings, and carry handle straps with hook and loop flap. For a proper fit, NcStar recommends a case at least +2″ longer than the firearm’s overall length.

This 2907 gun case features high density foam inner padding to protect your firearm, heavy duty metal double zippers, handle straps, I.D holder, and has a height of 13″.

VISM series Carbine Gun Case is designed for carbines that are less than 36″ in overall length. This gun case has many popular features like heavy duty zippers that are lockable, four external magazine pouches, padded carry handle, and adjustable shoulder straps. This is a great case for protecting and transporting carbines to the range. It features four external rifle magazine pouches with individual magazine flaps with hook and loop fasteners, heavy duty zippers that can be locked with a small pad lock, and padded carry handle straps and a shoulder sling is included. NOTE: Gun NOT included.

VISM series Carbine Gun Case is designed for carbines that are less than 36″ in overall length. This gun case has many popular features like heavy duty zippers that are lockable, four external magazine pouches, padded carry handle, and adjustable shoulder straps. This is a great case for protecting and transporting carbines to the range. It features four external rifle magazine pouches with individual magazine flaps with hook and loop fasteners, heavy duty zippers that can be locked with a small pad lock, and padded carry handle straps and a shoulder sling is included.

2960 series Carbine Gun Case is designed for carbines that are less than 36″ in overall length. This gun case has many popular features like heavy duty zippers that are lockable, four external magazine pouches, padded carry handle, and adjustable shoulder straps. This is a great case for protecting and transporting carbines to the range. Rectangular Padded Gun Case. Exterior dimensions are 36.0″ L X 13.0″ H. Four External Rifle Magazine Pouches with individual magazine flaps with hook and loop fasteners. Heavy Duty zippers that have metal zippers that can be locked with a small pad lock. Pad lock not included. Padded carry handle straps and a shoulder sling is included. Exterior material made with tough and durable PVC material that is water and chemical resistant. Rectangular shape makes the carbine gun case a little more discreet.

Deluxe SubGun double Pistol Carbine case allows for two AR & AK pistols, subguns, AOW or folding carbines to be transported within the padded main compartment with a padded divider to prevent weapons from contacting each other. Additional storage pouches to store mags or other gear. Each compartment has two diagonal side pocked to help secure each end of the firearm and two hook and loop straps to secure each firearm inside the case.The three large exterior pockets (2 each 7″H X 5″W and one 7″H X 7″W) to store your magazines and additional gear. Pocket flaps secure via plastic quick connect buckles, hook and loop fasteners and bungee cords help secure your gear in place. Two compression straps with plastic quick connect buckle on the top and bottom of the case to help secure your firearm and gears in place. Large Heavy Duty zippers on the main compartment with lockable metal zipper pulls. Heavy Duty padded carry handles. Adjustable shoulder strap attaches to large metal D-Rings. Case is made from heavy duty PVC material that is water and chemical resistant.