- New Tactical Series of 30mm Scope Rings.
- 30mm Scope Tube Diameter Rings with removable 1" inserts.
- Mounts onto Weaver/ Picatinny/ MIL-STD 1913 type rails.
- Hexagon Shape mounting nut with holes for torquing with Allan key wrench.
- Black Anodized Aluminum Construction
- Rings sold as a Pair.
- Optic Centerline Height: 1.5"
- Ring Overall Height: 2.4"
- Weight: 2.5 oz.
- Mounting tool included.
Features:
- Ultimate Tool Kit for Glock® handguns – includes four innovative multi-tools in a plastic hard carry case for Glock® armorers.
- VTUPRS: Universal pistol rear sight tool designed for: removal installation and the adjusting windage of dovetail rear sights. US PATENTS: 9784535 & D829294. Aluminum and steel construction.
- VTGLPRO: Glock® Pro Tool has five specific tools for Glock® pistols: magnetic 3/16? hex nut driver for the front sight channel liner removal and channel liner install tool bits hardened steel 3/32? (2.5mm) disassembly tool striker assembly holder and flat blade and Phillips screwdriver tool bit. Steel and polymer construction. US PATENT PENDING.
- VTGLMAG: MagPopper tool will help you disassemble your Glock® magazines in seconds. US PATENT: D839377. Aluminum construction.
- VTGLKPBL: Glock® Pocket Tool with hardened 3/32″ (2.5mm) steel punch disassemble tool and a 3/16″ hex nut driver (with magnetic tip) for removing/ installing Glock® front sights. Aluminum and steel
Features:
- Universal Pistol Rear Sight Tool designed for: Removal Installation and Adjusting windage of dovetailed rear sights for most Semi-Auto Pistol slides.
- The Universal Pistol Rear Sight Tool works with many types of semi-auto slides: full compact sub compact and pocket sized semi-auto pistols.
- Base platform is adjustable for height to get your slide and rear sights at the proper height for the rear sight pusher. Includes one bottom spacer for some pocket pistol slides for proper height alignment.
- Multiple Vertical and Horizontal clamps to secure various sizes and types of semi-auto slides in the tool.
- Adjustable top brace with plastic insert to secure the slide?s vertical placement on the base platform.
- Adjustable side braces with plastic inserts to secure the slides horizontal placement on the base platform. Includes two sets of side plastic inserts: a pair of flat inserts and a pair of stepped inserts to fit a wide variety of slide profiles.
- Rear sight pusher will work with 90 degree and 30 degree rear sight profiles. Rear sight pusher can remove install or adjust the rear sights in either direction.
- Side witness windows machined into both sides of tool frame to check for and verify proper tool and rear sight alignment.
- Sight tool frame can be bolted to clamped onto work surface or clamped onto a work vice.
- Rear sight pusher tool has an adjustable/removable handle or you can use a 15mm wrench or socket tool.
- Heavy duty Blue Anodized aluminum frame with steel tools
- Sight pusher steel screw has brass bushings for good bearing surface characteristics and excellent strength.
- Carrying bag included.
- US. PAT. 9784535
- US. PAT. D829294
Features:
- Ultra Bright 3W 200 Lumen CREE® LED Flashlight with Crenellated Bezel.
- Lightweight Glass Reinforced Nylon Ergonomically Textured Grip.
- Fully Adjustable (Windage & Elevation) Green Laser.
- Momentary and Constant On/Off Buttons.
- 3-way Toggle Mode switch for: Flashlight Only Laser Only and Both Flashlight and Laser modes.
- Hard Anodized Aluminum Upper for Rock Solid Mounting.
- Locking Quick Release Mount compatible with Weaver/Picatinny type rails.
- Powered by 2 each 3 Volt Lithium Batteries (CR123A) included
- Laser Type: Class IIIa
- Laser Wavelength: 532 nm (Green Laser Beam)
- Maximum Output: <5mw
- Length: 3.2″
- Height: 7.0″
- Weight: 10.0
- US PATENT: D704298
- International orders will not include batteries.
Features:
- Ultra Bright 3W 200 Lumen CREE LED Flashlight with Crenellated Bezel.
- Lightweight Glass Reinforced Nylon Ergonomically Textured Grip.
- Fully Adjustable (Windage & Elevation) Green Laser.
- Momentary and Constant On/Off Buttons.
- 3-way Toggle Mode switch for: Flashlight Only Laser Only and Both Flashlight and Laser modes.
- Hard Anodized Aluminum Upper for Rock Solid Mounting.
- Locking Quick Release Mount compatible with Weaver/Picatinny type rails.
- Powered by 2 each 3 Volt Lithium Batteries (CR123A) included
- Laser Type: Class IIIa
- Laser Wavelength: 532 nm (Green Laser Beam)
- Maximum Output: <5mw
- Length: 3.2"
- Height: 7.0"
- Weight: 10.0
- US PATENT: D704298
- International orders will not include batteries.
NcStar’s AR15 KeyMod Free-Float Handguard is low profile and features anodized aluminum construction for light weight and durability. This octagon-shaped handguard has seven sides of KeyMod slots, and a Picatinny top rail at AR15 receiver height with laser-engraved T-Slot numbers. It includes: barrel nut, handguard adapter insert, short and medium KeyMod to Picatinny accessory rails, and main handguard tube. Installation requires a low profile gas block and an AR15 Barrel Nut Wrench. It has a black anodized finish. This model is 10″ long. It weighs 11.3 oz. with both accessory rails installed, and 8.8 oz without rails.
NcStar’s Low Profile KeyMod Sling Swivel Stud/ Bipod Adapter mounts onto 2 KeyMod slots and is ideal for adding a sling swivel stud to your KeyMod handguards. It can also be used for mounting bipods that use the sling studs, like the NcSTAR
The NcStar ADO Scope features an integrated Red Dot Reflex Optic on top of the scope body. The Red Dot Reflex lens folds down when not in use and with a push of a button the Reflex Lens flips up to the deployed position and automatically turns the Red Dot reticle On. When the Reflex Lens is folded down to the stored position the Red Dot automatically turns Off.
The Electronic Control Panel is placed on top of the scope for Ambidextrous use. You can turn On/Off the Illuminated Reticle adjust the brightness level of the Illuminated Reticle change select the Reticle Color from Blue or Red and adjust the Red Dot brightness level.
- 5 brightness settings for the Illuminated Reticle and the Red Dot
- Elevation adjustment is done with the accessible turret wheel on the bottom of the scope
- Windage adjustment is via the Target Turret on the side
- ADO whole Ocular body functions as a large Magnification ring
- Adjustable reticle focus ring at the end of the ocular lens
- GEN3 Integrated Auto Locking Quick Release Mount fits Weaver/ Picatinny/ MIL-STD 1913 type rails
- Redesigned and more compact lever
- Uses 1 CR123A Lithium Type Battery (Included) for a long battery life
- Die Cast Aluminum Body
- Fully Multi-Coated lens for a bright crystal clear image quality
- US PATENT: 9163902
- US PATENT: D803347
The SRT 3-9X variable magnification rubber armored scope with a 40mm objective lens features a fully integrated Green Laser on top of the scope body. Top mounted fully adjustable Green Laser: 532nm, Max output <5mw, Class IIIA Laser. The Electronic Control Panel adjust the brightness level of the illuminated P4 reticle, changes the reticle color from blue or red and turns the Laser On/Off. There are five brightness settings for the Illuminated Reticle. The SRT whole Ocular body functions as a large magnification ring. There is also an adjustable reticle focus ring at the end of the ocular lens. Low Profile Elevation Turret with a Bullet Drop Compensator (BDC) calibrated for M193 55gr. FMJ Mil-Spec ammo. AR15/ M4 1" scope centerline height. Integrated Auto Locking Quick Release Mount, fits Weaver/ Picatinny/ MIL-STD 1913 type rails. Features a redesigned and more compact lever, integrated flip-up lens covers. Includes two AA batteries.
AR15 Lower Receiver Vise Block allows you to mount a MIL-Spec AR15 receiver to the vise block, for securing the AR lower receiver to a bench vise for maintenance and assembly. Includes a removable buffer tube mount ring to aid in installing carbine buffer tube straight and plumb onto the receiver. It will hold and lock the carbine buffer tube in place, so that the castle nut can be properly tightened without misaligning the buffer tube. Includes: AR15 lower receiver vise block, Buffer tube support ring with three thumb screws, Pistol grip bolt for securing receiver to the vise block
This pocket tool has 5 necessary tool elements for assembling and disassembling your Glock. A 3/32″ punch tool, 3/16″ hex nut driver, a MagPopper tool and a bottle opener. The corners of the tool handle are used for centering the frame pins in the frame. The pocket on the side of the tool acts as a third hand and holds the striker assembly while you disassemble it.
This tactical tool is designed in a pen configuration with a steel disassembly and from sight tool for Glock pistols. One side of the tool has a 2.5mm punch tool. It removes the pins and disassemble the Glock frame, slide and the magazine. The opposite side of the tool has a 3/16″ hex nut driver for removing/installing factory and aftermarket Glock front sights. The hex nut driver features an internal magnet to hold the front sight screw. Recommended for Glock, after market tool.
The innovative MagPopper tool will help disassemble Glock magazines in seconds. Works with most factory Glock flat floorplates, 10 round, standard capacity, and high capacity Glock magazines. Insert the hook from the small lever into the floor plate, rest the MagPopper body against the front of the magazine body. With one hand grasp the MagPopper and the magazine body and gently squeze. The floor plate will slide forward and unlock from the side magazine tabs with very little effort. Caution magazines are under spring tension. After you have unlocked the floor plate, carefully slide/remove the floor plate, locking plate, spring, and follower from the magazine body for service/cleaning. MagPopper also features: a bottle opener, a hole on the main body for mounting onto key rings, and a ” hex hole for holding ” screwdriver bits. Compact design for convenient storage and steel construction.
This Universal pistol front & rear sight pusher tool is for: removal, installation, and the adjustment of the front & rear sights for most semi-auto pistol slides. It has two separate sight pusher blocks, each pusher is specifically designed for either front or rear dovetail sights. The base platform is adjustable for height to properly align your sights at the proper height for the sight pusher blocks. The tool has side witness windows on both sides of the tool frame to check for the proper sight and pusher block alignment. The Sight tool frame can be bolted to, clamped onto a work surface, or clamped onto a vice.
- Green Laser: Freq. 532nm Class IIIa Laser
- Maximum Output: <5mw
- Compact Green Laser with Weaver style clamp on mount will fit most weaver & Picatinny type rails. Includes mounting tool
- Fully Adjustable for Windage and Elevation. Includes adjustment tool
- Momentary End Cap Switch and it also comes with Remote Pressure Switch
- All Aluminum Construction. Black Anaodized finish
- Uses 1 CR123A Lithium Type Battery (Included)
- Dimensions: 3.4" L x 1.1" W x 1.4" H
- Weight: 3.8 oz
- International orders will not include batteries.
- Precision Grade Bipod – Compact Model – 5.5" – 8.0" with Smooth Tension Legs
- Height: 5.5" Collapsed
- Height: 8.0 Fully Extended
- Bipod directly mounts onto most Sling Swivel studs. Includes 3 other adapters for flexible installation.
- Includes 3 separate Adapters: AR-15 GI Handguard adapter Universal Rifle Barrel mount and Weaver/ Picatinny type rail adapter with Sling Stud
- High Quality Construction with Hard Anodized Aluminum and STeel construction
- Spring Loaded Folding Action
- Rubber Pod Feet for Stability
- Weight: 10.2 oz
- Precision Grade Bipod – Compact Model – 5.5" – 8.0" with Notched Legs
- Height: 5.5" Collapsed
- Height: 8.0 Fully Extended
- Bipod directly mounts onto most Sling Swivel studs. Includes 3 other adapters for flexible installation
- Includes 3 separate Adapters: AR-15 GI Handguard adapter Universal Rifle Barrel mount and Weaver/ Picatinny type rail adapter with Sling Stud
- High Quality Construction with Hard Anodized Aluminum and STeel construction
- Spring Loaded Folding Action
- Rubber Pod Feet for Stability
- Weight: 10.2 oz
- Precision Grade Bipod – Full Size Model – 7.0" – 11.0" with Smooth Tension Legs
- Height: 7.0" Collapsed
- Height: 11.0 Fully Extended
- Bipod directly mounts onto most Sling Swivel studs. Includes 3 other adapters for flexible installation
- Includes 3 separate Adapters: AR-15 GI Handguard adapter Universal Rifle Barrel mount and Weaver/ Picatinny type rail adapter with Sling Stud
- High Quality Construction with Hard Anodized Aluminum and STeel construction
- Spring Loaded Folding Action
- Rubber Pod Feet for Stability
- Weight: 11.1 oz
- 3W Ultra Bright 200 Lumen CREE® LED flashlight and Green Laser Combo unit with Quick Release Weaver / Picatinny type mount
- Mounts onto most Weaver / Picatinny /Pistol accessory spec rails
- Ambidextrous Momentary or Constant-On Switch
- Rear Selector Mode Switch: for Laser Only Flashlight Only or Both Flashlight & Laser modes
- Ultra-Bright LED with 200 Lumens Peak Output Updated Now with CREE® LED
- Fully Adjustable Green Laser: 532nm Max output <5mw Class IIIa Laser
- Dimensions: 3.4L x 1.4W x 1.9H
- Weight: 4.0 oz. with Batteries
- Aluminum and Reinforced Nylon Construction
- Uses 2 CR123A Battery (Included)
- NOTE: NcSTAR has always made a practice of providing the best products at the best prices. Due to technology advances we have upgraded all of our flashlights to higher lumen values as stated on our website. Until old packaging and instructions sheets are depleted and updated you may receive packaging or instructions stating the old lumens but rest assured that all of the NcSTAR flashlights will have the lumens stated on the website.
- International orders will not include batteries.
- Red Laser: Freq. 635-655nm Class IIIa Laser
- Maximum Output: <5mw
- Weaver style mount will fit most weaver & Picatinny type rails
- Fully Adjustable for Windage and Elevation
- Side to Side Toggle On/Off Switch
- All Aluminum Construction. Black Anaodized finish
- Uses 2 each AG13 button cell batteries (Included)
- Includes mounting tools
- Dimensions: 2.0" L x 1.1" W x 0.9" H
- Weight: 1.3 oz
- International orders will not include batteries.
- 3W Ultra Bright 200 Lumen CREE® LED flashlight and Red Laser Combo unit with Quick Release Weaver / Picatinny type mount
- Mounts onto most Weaver / Picatinny /Pistol accessory spec rails
- Ambidextrous Momentary or Constant-On Switch
- Rear Selector Mode Switch: for Laser Only Flashlight Only or Both Flashlight & Laser modes
- Ultra-Bright LED with 200 Lumens Peak Output Updated Now with CREE® LED
- Fully Adjustable Red Laser: 635-655nm Max output <5mw Class IIIa Laser
- Dimensions: 3.4L x 1.4W x 1.9H
- Weight: 4.0 oz. with Batteries
- Aluminum and Reinforced Nylon Construction
- Uses 2 CR123A Battery (Included)
- NOTE: NcSTAR has always made a practice of providing the best products at the best prices. Due to technology advances we have upgraded all of our flashlights to higher lumen values as stated on our website. Until old packaging and instructions sheets are depleted and updated you may receive packaging or instructions stating the old lumens but rest assured that all of the NcSTAR flashlights will have the lumens stated on the website.
- International orders will not include batteries.
- Sleek One Piece Main Tube
- Non-illuminated Reticle
- Multi-coated Lens
- Includes Lens Covers
- Scope Rings not included.
<ul><li>Green Laser: Freq. 532nm Class IIIa Laser</li><li>Maximum Output: <5mw</li><li>Quick Release Weaver Style Mount</li><li>Fully Adjustable for Windage and Elevation. Includes adjustment tool</li><li>Ambidextrous Sliding On/Off Switch</li><li>All Aluminum Construction. Black Anaodized finish</li><li>Uses 1 CR2 Lithium Type Battery (Included)</li><li>Dimensions: 2.6" L x 1.0" W x 1.6" H</li><li>Weight: 3.3 oz</li><li>Nominal Operating temperature: 59 – 95 degrees Fahrenheit</li><li>International orders will not include batteries.</li></ul>VISM by NcSTAR COMPETITION RANGE BAG/BLACK