YOU MUST BE 18 OR OLDER TO ENTER

Otis Technology 100% cotton square gun cleaning patches are not only more absorbent, but will not leave streaks in your barrel. Includes 100 – 3 inch square patches

Essential for Glock owners, this 8-in-1 tool from Otis handles a variety of maintenance needs for your pistol in a convenient size that easily fits in a pocket, range bag or pistol case. The base handle has four distinct purposes – 1/4” bit driver, 8-32 threaded insert to accommodate additional components, Memory-Flex cable slot for use as a T-handle, and punch hammer for resetting pins. The tool includes four bits that seat in the magnetized bit driver. The pin punch has additional length to fully push takedown pins through the frame. The front sight adjustment tool is magnetized for easy installation of the screw without losing the nut. The tool also comes with one 5/32” flat head and one #0 Philips bit.

The PATRIOT Series Cleaning Kit by Otis offers the essential firearm maintenance gear to properly clean from Breech-to-Muzzle. Each cleaning kit is designed to clean one caliber or gauge and features a new tool that acts as both a T-handle and a driver for the included 4 bits. Made in the USA and at a price that won’t break the bank you can pick one up for every firearm that you own. Available in 8 configurations.

• Memory-Flex cable slotted tip & bore mop for effective and correct Breech-to-Muzzle® cleaning
• Caliber specific bronze bore brush removes deposits and other fouling.
• Tool acts as t-handle and driver for included 4 bits.
• Double ended AP brush for cleaning hard to reach areas.
• Chamber brush rod curved and straight locking lug pick for proper cleaning of chamber and locking lugs*.
• *only available in .223 cal/5.56mm version.

The Otis AP Blue Nylon All Purpose Brushes Double ends allow for large surface scrubbing on one end and precision cleaning with the smaller end. Removes fresh carbon or powder residue but won’t scratch your firearm finish. For everyday use and can be used on virtually any surface including wood surfaces. Nylon bristled brush meets Mil. Spec.

Properly cleaning and maintaining your airguns is a lot like cleaning your traditional firearms but there are some important differences. The Airgun Maintenance & Cleaning Kit from Otis Technology takes those differences into consideration and offers a complete kit designed with airguns in mind. Complete in these kits you’ll find a silicone-based lubricant and silicone gun cloth to lubricate and protect your airgun while maintaining the integrity of o-rings seals and gaskets. A 7-piece Hex L-wrench set that ranges from .71mm to 3mm aids in disassembly of your airguns for maintenance work. A bent pick helps easily remove o-rings and the AP brush as well as the end brush offer detail cleaning or lubricant application. This kit also includes Breech-to-Muzzle cleaning gear – a 34” Memory-Flex cable with affixed slotted tip and (10) 2” patches for proper bore cleaning. With a complete lens cleaning set also included you’ll be able to maintain your optic with this kit too. And when you’re all done clean the lead and other heavy metals from your skin with the included lead cleaning hand wipe. All contained in a tackle-box style case.

• Complete Airgun Maintenance & Cleaning Kit ideal for all types of airguns
• Silicone-based lubricant can be safely used on o-rings/seals/gaskets without degradation
• Lubricant includes needle point applicator for precision application
• Silicone gun cloth also included to wipe polish and protect your airgun
• Hex L-wrench set (.71 .89 1.27 1.5 2 2.5 & 3mm) aids in airgun disassembly for maintenance work
• Remove o-rings with the included bent pick
• AP brush and End Brush for detailed cleaning or application of lubricant
• Memory-Flex cable (34”) and 2” patches allow for proper Breech-to-Muzzle cleaning of the bore
• Lens gear included (lens brush lens tissue lens cloth lens spray 0.5 fl oz cotton swabs (6)) for maintenance and care of your scope and other optics
• Lead cleaning hand wipe included to cleanse hands of lead and heavy metals from skin
• Made in USA

The All Caliber Rifle Cleaning System is ideal for all rifles including lever actions bolt actions and autoloaders. This premium cleaning system will clean all rifles from .17 caliber through .45 caliber. This kit contains three Memory-Flex® cleaning rods; a 30″ cleaning rod an 8″ chamber cleaning rod and a 34? small caliber cleaning rod with a brass slotted tip. Also included are two solid brass slotted tips two brass obstruction removers to knock out mud snow or a stuck case a rod connector a T-handle bar for added comfort when pulling a patch down the barrel a .5oz tube of Otis O85® Ultra Bore® Solvent all-caliber cotton cleaning patches and the .22 and .35 caliber bore brushes. The black nylon case comes standard with a locking zipper and belt loop attachment. Make your next hunt a success by using Otis.

? Caliber/Gauge: .17 – .45 Caliber Rifles
? Dimensions: 4″ x 4″ x 2″

The Armorer’s Pistol Tool offers four tools in one to service and maintain semi-automatic pistols such as Glock, Sig Sauer, Smith & Wesson, Ruger, Taurus, FNH, and H&K. Unscrew the nylon end brush to reveal a storage area for additional tools. The 3/32” pin punch knocks out pins with ease for convenient disassembly. Install, adjust or remove aftermarket front sight with the 3/16 nut driver. The brass scraper allows removal of the trigger connector while also scraping carbon. A nylon end brush allows safe cleaning of debris without damaging finish. The main body of the tool is textured for increased grip while working.

The B.O.N.E. Tool is specifically designed to clean carbon and fouling from the bolt carrier of MSR/AR-style rifles. This tool scrapes fouling from the bolt, bolt carrier and firing pin. Includes an 8-32 threaded hole to act as a T-handle.

MSR/AR owners know the importance of a clean bolt and bolt carrier group. Carbon and fouling can build-up in these areas causing jams and malfunctions. The B.O.N.E. Tool was designed specifically to clean the bolt carrier assembly area.

The Otis Technology 36″ Brass one piece gun cleaning rod is made in the USA and designed to offer an easy and effective way to clean your firearms. The coated solid rod features a smooth, non-embedding finish for precision cleaning with American quality and durability that won’t scratch or damage your barrel or collect debris. The full size handle with steel ball bearings allows the rod to turn with the rifling of the barrel to remove fouling with your choice of Otis components from jags and patches to bore mops and brushes. The rod tip is outfitted with a standard 8-32 thread to accept Otis brushes, mops and jags.

For all your at-home gunsmithing needs, this gunsmithing punch set gets the job done. Includes 5 brass 4” long pin punches sized 3/32, 3/16, 5/32, 1/8 & 1/4. Made from corrosion resistant brass and hex machined. The chamfered striking surface reduces burring.

FEATURES
-Cleans .22-.45 caliber
-Tufcor® core wire is corrosive resistant, has a tighter twist, & can be used with all firearm cleaning chemicals
-The stem is cold welded to the core & the brush is filled to the end
-Size is stamped on the stem

With a competitive drive and a never-ending passion for hunting and shooting, OTIS is constantly looking for a better way to help you care for your firearms. OTIS Smart Gun Care products allow passionate gun owners to get more from their firearms. More years. More precision. More rounds down range.

With a competitive drive and a never-ending passion for hunting and shooting, OTIS is constantly looking for a better way to help you care for your firearms. OTIS Smart Gun Care products allow passionate gun owners to get more from their firearms. More years. More precision. More rounds down range.

These 100% cotton 3” patches are designed to clean .243 cal through 12/10 gauge firearms. Each patch can be used up to 6 times. When attached to the slotted tip, they form a circular cleaning swab for 360 degrees of coverage.

The Defender Series cleaning system originally developed for the soldier is now available for hunters and shooters. Contains all the tools needed for proper Breech-to-Muzzle cleaning – such as Memory-Flex cables bore brush slotted tip and patches. It features a Ripcord for quick one-pass cleaning. It also includes an all-purpose receiver brush and solid rod sections*. Available in a variety of configurations choose the Defender Series that fits your needs.

The Defender Series cleaning system originally developed for the soldier is now available for hunters and shooters. Contains all the tools needed for proper Breech-to-Muzzle cleaning – such as Memory-Flex cables bore brush slotted tip and patches. It features a Ripcord for quick one-pass cleaning. It also includes an all-purpose receiver brush and solid rod sections. Available in a variety of configurations choose the Defender Series that fits your needs.

Originally developed for the United States military, Otis Dry Lube is our most advanced formula yet. Designed for desert use, it lets you quickly and effectively lubricate your firearm in the most unforgiving environments. Dries to the touch in less than 20 seconds.

Otis Technology presents a smarter way to protect your hearing while improving your response to range commands and other communication. Ear Shields new Sound Reduction Chamber Technology changes the sport shooter experience. Now you can shield your ears from high-decibel noise comfortably while hearing other sound frequencies like speech clearly without removing your gear. Unlike muffs Ear Shields compact design won’t get in the way of achieving the proper cheek weld.

FEATURES
-Shields your ears from high-decibel noise while hearing other sound frequencies, such as speech,clearly
-Improves communication
-Eliminated stock interference
-Cool & comfortable
-No batteries required
-Lightweight & collapsible
-Adjustable to fit any shooter
-26 dB noise rating

EarShield Premium Foam Earplugs provide portable hearing protection for use in loud environments. They come in a 50-pair can for convenient storage and easy access. A waterproof, screw-top canister is included to carry two earplugs and clips to a keyring or strap.

The Otis Elite now available in a pistol edition. For the firearm owner with multiple pistols, this comprehensive kit has your .22 – .45cal pistols covered. It includes Breech-to-Muzzle cleaning gear for .22cal, .38/.380/9MM, .40, .44, and .45 caliber pistols with nylon and bronze bore brushes as well as mops. Get a quick clean with 4 included Ripcords for .22cal, 9mm/.38 cal/.380 /.357, 10mm/.40 cal & .45cal. Specialized gear such as scraper tools, AP brushes, Glock magazine disassembly tool and 8-in-1 Pistol Tool take your cleaning to the next level. Protect your pistols when working on them with the included 11×17 gun cleaning mat.

Whether a hunter competitive shooter or collector gun owners understand the importance of taking care of their investment. Having all the right tools in one complete – and portable – cleaning system at camp at the range or at home keeps firearms in top condition. Specifically designed for .17 to .50 cal. rifles and pistols .410 to 12/10 ga. shotguns and all in-line muzzleloaders. From the Front Lines to the Hunt of a Lifetime.

• Over 40 firearm-specific cleaning components in a nylon case
• 6 Memory-Flex Cables of varying length for effective and correct Breech-to-Muzzle cleaning
• 22 bronze bore brushes remove copper deposits and other fouling
• Obstruction removal tools for jammed cases and other blockages
• Specialized precision tools for complete breakdown and fine cleaning of all critical and hard to reach areas of your firearm
• Optics cleaning gear for care and maintenance of scopes rangefinders and more
• Removable Tactical Cleaning System (Item # FG-750) for convenient carrying in the field
• Dimensions: 15 1/4 in. x 8 3/4 in. x 4 1/2 in.