YOU MUST BE 18 OR OLDER TO ENTER

O85 CLP is a multi-purpose formula designed to clean, lubricate, and protect firearms. It is engineered to penetrate tight spaces and leave a thin protective film on metal surfaces. This film helps resist rust and corrosion for long-lasting protection during use and storage.

Otis Panoply patches are 100% cotton, 3-inch rounds designed for rifles .30 caliber and larger. Each patch reusable up to six times, providing 360-degree coverage when attached to the slotted cleaning tip for thorough bore maintenance.

Specs

• Quantity: 75 patches
• Size: 3-inch round
• Material: 100% cotton
• Caliber Range: .30 cal and larger rifles, 9mm+ handguns, all shotguns
• Reuses Per Patch: Up to 6 times
• Coverage: 360-degree cleaning swab

Questions about fitment or availability? Give the shop a call and we’ll walk you through it.

The Patriot Series includes items to properly clean and maintain .45 caliber pistols. Includes cotton patches, all-purpose brush with rod, bronze bore brush and mop, 8” Memory-Flex cable with large slotted tip, and t-handle. All items packed in a reusable hard case. Made in the USA.

This kit includes essential components to maintain .22 caliber rifles. Includes cotton patches, all-purpose brush with rod, bronze bore brushes and mops, 34” Memory-Flex cable, and small slotted tip. All items packed in a reusable hard case. Made in the USA.

The Otis Technology 11 Inch Coated Stainless Steel one-piece Pistol Cleaning Rod is made in the USA and designed to offer an easy and effective way to clean your handguns. The coated solid rod features a smooth, non-embedding finish for precision cleaning with American quality and durability that won’t scratch or damage your barrel or collect debris. The 11 inch rod will allow for the cleaning of most handguns and revolvers; .22 caliber and larger. The full size handle offers dual functionality. With the swivel end installed, the rod turns with the rifling or install the fixed end for smooth bore or chamber cleaning. The rod tip is outfitted with a standard 8-32 thread to accept Otis brushes, mops and jags.

A must-have for any Glock owner, this combo includes an 8-in-1 Pistol T-Tool and a Magazine Plate Disassembly Tool for Glocks. The base handle has four distinct purposes – 1/4” bit driver, 8-32 threaded insert to accommodate additional components, Memory-Flex cable slot for use as a T-handle and punch hammer for resetting pins. The tool also includes four bits that seat in the magnetized bit driver. The pin punch has additional length to full push takedown pins through the frame. Keep from losing the nut on the front site with the magnetized front site adjustment tool. The tool also comes with one 5/32” flat head and one #0 Philips bits

These brushes are the elite in cleaning those hard to reach places. They give you the ability to scrub places where carbon powder and copper residue hibernate.

• Brass core with folded end won't loosen corrode or scratch
• Brush stem cold-welded to the core
• Brush caliber stamped on stem of brush
• Precision thread – no weak undercut
• Bristles run all the way to the end

The Gunsmithing Pick Set allows you to punch pins, clean locking lugs, slides, rails, bolt, trigger group and more. With two ergonomic rod handles, you’ll be able to scrape away carbon from any hard to reach area of your firearm. Includes a double ended AP brush plus pin punch, locking lug scraper, flat scraper, mini end brush, bent pick, straight pick and two textured ergonomic handles.

This cleaning kit contains a variety of components to clean pistols in the most common calibers. Includes round, cotton patches in 2” and 3” sizes. Four bore brushes are included for .22 cal, .38 cal/9mm, .40 cal & .45 cal. The obstruction remover gets rid of stubborn debris and doubles as a t-handle base for the included female rod handle. The 8” and 12” Memory-Flex cables provide proper cleaning from the breech to muzzle (slotted tip permanently affixed on 8” cable). Pin punch, end brush, scraper, straight & bent pick, short AP brush for precise cleaning. Also includes chamber flag, 0.5 fl. oz. Shooter’s Choice FP-10 Lubricant Elite CLP & instruction manual. Items are packed in a 4”x4”x2.5” soft pack case. Made in the USA.

This kit includes a variety of tools and components for cleaning Glock 9mm, .40 and .45 pistols. Includes a Memory-Flex cable, Ripcord, and pistol loop rod. The 8-in-1 pistol T-Tool is used for resetting pins, pushing take down pins, front sight adjustments and more. The magazine plate removal tool allows easy removal for cleaning and maintenance. Includes FP-10 Lubricant and a Nylon AP Brush with double ends.

Otis .22/.223cal Rifle & Pistol Cleaning Kit

Otis Technology’s .22/.223 caliber Rifle & Pistol Cleaning Kit contains quality brass components that won’t damage your firearm while cleaning. Get everything you need to clean your .22-.223 caliber rifles (including 5.56 NATO) in one place with this gun cleaning kit. Includes 4 brass rod sections along with a brush mop jag and patches. An all purpose brush and bottle of FP-10 Lubricant Elite CLP is also included to keep your firearm properly lubricated and operating smoothly.

Details:

• Cleans: .22-.250 cal .223 cal/5.56mm/5.56NATO 5.7mm/ .22 Rimfire .22LR
• (4) brass rod sections with male/female 8-32 threaded ends and swivel handle rod for easy cleaning
• .22 cal bronze phosphor bore brush
• .22 cal cotton bore mop
• Brass component adapter
• 100 count 1”x1” cleaning patches
• Nylon All-Purpose cleaning brush
• .22 cal brass pierce point jag
• 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP
• Precision machined and proudly made in the USA

Otis .270cal Rifle Cleaning Kit

Otis Technology .270 caliber Rifle Cleaning Kit contains quality brass components that won’t damage your firearm while cleaning. Get everything you need to clean your .270 cal 6.8mm & 7mm rifles in one place with this gun cleaning kit. Includes 4 brass rod sections along with a brush mop jag and patches. An all purpose brush and bottle of FP-10 Lubricant Elite CLP is also included to keep your firearm properly lubricated and operating smoothly.

Details:

• Cleans 260cal .270cal .280cal .284cal 6.8mm 7mm 
• (4) brass rod sections with male/female 8-32 threaded ends and swivel handle rod for easy cleaning
• .270 cal bronze phosphor bore brush
• .270 cal cotton bore mop
• Brass component adaptor
• 100 count 1”x1” cleaning patches
• Nylon All-Purpose cleaning brush
• .270 cal brass pierce point jag
• 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP
• Precision machined and proudly made in the USA

Otis .30cal Rifle Cleaning Kit

Otis Technology’s .30 caliber Rifle Cleaning Kit contains quality brass components that won’t damage your firearm while cleaning. Get everything you need to clean your .30 cal rifle (or variant) in one place with this gun cleaning kit. Includes 4 brass rod sections along with a brush mop jag and patches. An all purpose brush and bottle of FP-10 Lubricant Elite CLP is also included to keep your firearm properly lubricated and operating smoothly.

Details:

• Cleans .30.30-06.30-30.303.308 caliber300 Win Mag.32 cal 7.62mm & 8mm rifles
• (4) brass rod sections with male/female 8-32 threaded ends and swivel handle rod for easy cleaning
• .30 cal bronze phosphor bore brush
• .30 cal cotton bore mop
• Brass component adaptor
• 20 count 2.5”x2.5” cleaning patches
• Nylon All-Purpose cleaning brush
• .30 cal brass pierce point jag
• 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP
• Precision machined and proudly made in the USA

Otis 6.5mm Rifle Cleaning Kit

Otis Technology’s 6.5mm Rifle Cleaning Kit contains quality brass components that won’t damage your firearm while cleaning. Get everything you need to clean your .243 cal & 6.5mm rifles in one place with this gun cleaning kit. Includes 4 brass rod sections along with a brush mop jag and patches. An all purpose brush and bottle of FP-10 Lubricant Elite CLP is also included to keep your firearm properly lubricated and operating smoothly.

Details:

• Cleans: .243 6mm 6mm ARC 6.5mm rifles
• (4) brass rod sections with male/female 8-32 threaded ends and swivel handle rod for easy cleaning
• .243cal/6.5mm bronze phosphor bore brush
• .243cal/6.5mm cotton bore mop
• Brass component adaptor
• 100 count 1”x1” cleaning patches
• Nylon All-Purpose cleaning brush
• .243cal/6.5mm brass pierce point jag
• 0.5 fl. oz. bottle of FP-10 Lubricant Elite CLP
• Precision machined and proudly made in the USA

FEATURES:
-Cleans: .22cal Pistol
-Length: 22.5″
-10 inches of aggressive cleaning surface
-Caliber specific molded rubberized core for 360 degree cleaning
-Heat resistant up to 700 degrees F
-Nomex® fibers act as both a brush to loosen & a patch to capture fouling particles
-Easy-feed design makes for quicker cleaning from Breech-to-Muzzle®
-Equipped w/ 8-32 threaded ends to fit Otis cleaning components

Ripcord features a rigid, helix-shaped rubber core that keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean of .260 cal/.264 cal/6.5mm firearms. The braided Nomex surface can withstand temperatures up to 700° F, allowing you to clean at the range or in the field when the barrel is hot. The easy-feed design makes cleaning easy from breech to muzzle. The 8-32 threaded end fits all Otis cleaning components. The Ripcord measures 36” long with 10” of aggressive cleaning surface.

Ripcord features a rigid, helix-shaped rubber core that keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean of .270 cal/6.8mm/7mm firearms. The braided Nomex surface can withstand temperatures up to 700° F, allowing you to clean at the range or in the field when the barrel is hot. The easy-feed design makes cleaning easy from breech to muzzle. The 8-32 threaded end fits all Otis cleaning components. The Ripcord measures 36” long with 10” of aggressive cleaning surface.

Ripcord features a rigid, helix-shaped rubber core that keeps the cleaning surface pressed against the bore, engaging the rifling for an aggressive clean of 30/.30-30/.30-06/.308 cal/7.62mm firearms. The braided Nomex surface can withstand temperatures up to 700° F, allowing you to clean at the range or in the field when the barrel is hot. The easy-feed design makes cleaning easy from breech to muzzle. The 8-32 threaded end fits all Otis cleaning components. The Ripcord measures 36” long with 10” of aggressive cleaning surface.

FEATURES
-Cleans .40 cal
-10″ of aggressive cleaning surface
-Heat resistant up to 700°F
-Helix shape engages rifling through the barrel
-Nomex® fibers act as both a brush to loosen & a patch to capture fouling particles
-Equipped with 8-32 threaded ends to fit all Otis cleaning components

FEATURES
-Cleans 20 ga.
-10″ of aggressive cleaning surface
-Heat resistant up to 700°F
-Helix shape engages rifling through the barrel
-Nomex® fibers act as both a brush to loosen & a patch to capture fouling particles
-Equipped with 8-32 threaded ends to fit all Otis cleaning components

For times in the field when you just can?t reach your Otis cleaning system and need a quick and effective clean – reach for the Ripcord. This convenient tool cleans from Breech-to-Muzzle in one quick and easy pass. The molded rubberized core and Nomex fibers together create a more effective way to trap and remove fouling.

• 10 in. of aggressive cleaning surface
• Heat resistance up to 700 degrees F
• Helix shape engages rifling through the barrel
• Nomex fibers act as both a brush to loosen and a patch to capture fouling particles
• Equipped with 8-32 threaded ends to fit all Otis cleaning components

For times in the field when you just can?t reach your Otis cleaning system and need a quick and effective clean – reach for the Ripcord. This convenient tool cleans from Breech-to-Muzzle in one quick and easy pass. The molded rubberized core and Nomex fibers together create a more effective way to trap and remove fouling.

• 10 in. of aggressive cleaning surface
• Heat resistance up to 700 degrees F
• Helix shape engages rifling through the barrel
• Nomex fibers act as both a brush to loosen and a patch to capture fouling particles
• Equipped with 8-32 threaded ends to fit all Otis cleaning components