Introducing the AUS Mount for 30mm diameter magnified optics from Reptilia. Driven by the request of an end user group the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile streamline design. Also like our DOT Mount line the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.

The AUS is compatible with all of our existing 30mm ROF line and will be compatible with several new ROF products launching over the coming months.

Like all Reptilia products the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Machined from billet 7075-T6 aluminum
MIL-STD Type III hardcoat anodized
158 grams
30mm diameter bore
39mm (1.54 inch) bore height
Up to 77mm objective will clear flat-top Picatinny
Made in USA

The 1.70 inch bore height AUS Mount for 30mm diameter magnified optics from Reptilia is driven by the request of an end user group the AUS Mount is the culmination of a 2 year development program. Like Reptilia's DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via their anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with a T-25 Torx or a flat blade driver to sit flush with the body of the mount for a low-profile streamline design. Also like Reptilia's DOT Mount line the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.

The AUS is compatible with all of Reptilia's existing 30mm ROF line.

Like all Reptilia products the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

The 1.70 inch bore height AUS Mount for 34mm diameter magnified optics from Reptilia is driven by the request of an end user group the AUS Mount is the culmination of a 2 year development program. Like their DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via their anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with a T-25 Torx or a flat blade driver to sit flush with the body of the mount for a low-profile streamline design. Also like Reptilia's DOT Mount line the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III Class 2 hard anodize coating.

The AUS is compatible with all of Reptilia's existing 34mm ROF line.

Like all Reptilia products the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Machined from billet 7075-T6 aluminum
MIL-STD Type III hardcoat anodized
165 grams
34mm diameter bore
43.2mm (1.70 inch) bore height
Up to 86mm objective will clear flat-top Picatinny
Made in USA

Introducing the AUS OFFSET Mount for Aimpoint ACRO and Steiner Optics MPS enclosed miniature red dot sights. Designed as part of their AUS Mount System as a secondary sighting system for rapid target engagement, the AUS Offset Mount is compatible with Aimpoint ACRO and Steiner Optics MPS optics, as well as any other MRDS that utilizes the ACRO footprint. The AUS Offset Mount for ACRO/MPS is reversible to be used on the left or right side of the AUS Mount via the 4 mounting locations integrated in the AUS Mount body.

Introducing the AUS OFFSET Mount for Leupold Delta Point Pro miniature red dot sight. Designed as part of their AUS Mount System as a secondary sighting system for rapid target engagement, the AUS Offset Mount is compatible with Leupold Delta Point Pro , as well as any other MRDS that utilizes the DPP footprint. The AUS Offset Mount for DPP is reversible to be used on the left or right side of the AUS Mount via the 4 mounting locations integrated in the AUS Mount body.

Designed as part of Reptilia’s AUS Mount System as a way to keep the scope aligned and prevent the rie from tilting to the side. This level is reversible to be used on the left or right side of the AUS Mount via the 4 mounting locations integrated in the AUS Mount body. Note: The AUS OFFSET bubble level was designed specically around the Vortex Optics Razor HD Gen III 1-10×24 LVPO. Some larger windage knob optics may occlude the view of the o set.

Reptilia's CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles AR15 pistols pistol caliber carbines and PDWs.

The CQG supports a wide range of hand sizes and weapon configurations featuring a more pronounced vertical grip angle anti-slip front and rear texture and an enhanced beaver tail design; the CQG encourages the shooter’s hand to be positioned higher on the grip for greater control and improved comfort.

Fits AR15/AR10/SR25/MCX/FN SCAR 16 and 17 Pattern Hosts
Toughened and Reinforced Nylon
77 grams
MADE IN USA

Introducing the next addition to Reptilia’s line of AR pattern grips, the CQG-L Grip. The CQG-L has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with an additional 0.5″ of length for those who have larger hands or prefer a longer grip.

The CQG-L has all of the geometry users have loved in the CQG for 4 years now specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles AR15 pistols pistol caliber carbines and PDWs with an additional 0.5″ of length for those who have larger hands or prefer a longer grip.

The CQG-L supports a wide range of hand sizes and weapon configurations featuring a more pronounced vertical grip angle anti-slip front and rear texture and an enhanced beaver tail design; the CQG encourages the shooter’s hand to be positioned higher on the grip for greater control and improved comfort.

Fits AR15/AR10/SR25/MCX/FN SCAR 16 and 17 Pattern Hosts
Toughened and Reinforced Nylon
89 grams
MADE IN USA

Introducing the next addition to Reptilia’s line of AR pattern grips, the CQG-NB Grip. The CQG-NB (No-Beavertail) has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with the only difference being the removal of the beavertail in the thumb web area, to get closer to the A2 feel that some users prefer.

The DOT Mount by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design. Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. Additional heights and optic configurations coming soon!

Introducing the ultra Low Height DOT Mount for Aimpoint ACRO and Steiner Optics MPS by Reptilia. This mount is a lightweight, slim-line mounting solution for allowing for co-witness with BUIS on subguns and AKs with gas tube with 1913 Picatinny atop. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, this Low DOT Mount attaches to any M1913 Picatinny rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

The 1.93″ height DOT Mount for Aimpoint ACRO by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

The 1.93 DOT Mount for Holosun HE509T by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design. Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

The 1.93 inch height DOT Mount for Trijicon RMR/SRO by Reptilia is a lightweight, slim-line mounting solution for a number of red dot optics that utilize the RMR mounting geometry. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

Offset DOT Mount for Aimpoint ACRO and Steiner MPS enclosed miniature red dot sights. Designed as a secondary sighting system for rapid target engagement, the Offset DOT Mount is compatible with Aimpoint ACRO and Steiner MPS optics, as well as any other MRDS that utilizes the ACRO footprint. DOT Mount – Offset for ACRO and MPS is reversible to be used on the left or right side of the 1913 Picatinny rail.

The DOT Mount by Reptilia is a lightweight slim-line mounting solution for a variety of red dot optics.

Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the DOT Mount attaches to any M1913 Picatinny rail and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.

Like all Reptilia products the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Type III hardcoat anodized 7075-T6 aluminum
Nitrided 4140 steel
43 grams
Made in USA
Includes mounting screws and hex L-key

Introducing the Reptilia handguard featuring patented turn buckle technology. The handguard is compatible with all M4 upper receivers, and comes in M-LOK configuration. Includes the required barrel nut and hardware.