Introducing the Reptilia handguard featuring patented turn buckle technology. The handguard is compatible with all M4 upper receivers, and comes in M-LOK configuration. Includes the required barrel nut and hardware.

Reptilia's Low Profile M-LOK Rail is driven by an end user request for a solution to mount an aiming laser as close to a M-LOK handguard as possible. Getting the aiming laser closer to the bore axis reduces offset and also reduces snag hazard of the laser on the side of the handguard. The LPR is machined from billet 7075-T6 Aluminum and finished with Milspec Type III Hard Coat Anodize and FNC (Nitride) coated M-LOK hardware.

Like all Reptilia products the LPR Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the Ambidextrous Safety Selector, machined from billet 7075-T6 aluminum and coated in a variety of anodizing to match other popular Reptilia accessories. The Reptilia Selector is designed to be operated comfortably by both left and right handed shooters. Utilizing the same hand movements without either hand having to break away from the grip will ensure the shooter’s accuracy and application.

Introducing the Puller ambidextrous charging handle. Designed at the request of a military end user, it is low profile, sturdy, and a must-have upgrade for any shooting style. It is made from billet 7075-T6 aluminum and finished with MIL-STD Type III, Class 2 hard anodize.

Introducing the RECCE Carbine Stock by Reptilia! After over two years of development and testing, Reptilia proudly announces the RECCE Stock for AR10/SR25 pattern rifles. Designed at the request of a military end user, the RECCE Stock features a constant cheek weld, switchable QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.8 ounces including the proprietary SR-25/A5-length receiver extension, the RECCE stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision.

The RMU Mount by Reptilia is a lightweight slim-line solution manufactured at the request of a DoD customer. The RMU Mounts are ideal for lifting a variety of optics with fixed height lower 1/3 co-witness heights such as the EOTech line of holographic optics Vortex Optics AMG UH-1 and Sig Optics ROMEO8T to an elevated height which is more ergonomic when using helmet-borne night vision or those who prefer a more upright shooting stance.

The RMU Mount is machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the RMU Mount attaches to any M1913 Picatinny rail and offers optimal sight placement with an increase in height of .625 inches. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.

Available in 12 9 and 6 slot configurations in a black anodized finish today!

Machined from billet 7075-T6 aluminum
Milspec Type III hard anodized finish
95 grams
Made in USA

The RMU Mount for Magnifiers by Reptilia is a lightweight slim-line solution manufactured at the request of a user group. The RMU Mount for Magnifiers lifts 3x and 6x magnifiers 0.39″ in their original mounts (typically 39mm/1.54” height) to alight with a 1.93” height mounted red dot optic such as our DOT Mount for Micros. It could also be used for BUIS or other optic configurations to lift them up.

The RMU Mount for Magnifiers is machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish the RMU Mount attaches to any M1913 Picatinny rail and offers optimal sight placement with an increase in height of .39 inches. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process and sit flush with the body of the mount for a low-profile anti-snag design.

Available in black and FDE anodized finish today!

Machined from billet 7075-T6 aluminum
Milspec Type III hard anodized finish
51 grams
Made in USA

Reptilia ROF-Diving Board, originally for 34mm Geissele Super Precision Magnified Optic Mounts, is also compatible with Reptilia 34mm AUS Mounts. The Diving Board places a MIL-STD-1913 rail at the ideal position and height to mount laser range finders . Additionally the Diving Board doubles the support area on the optic tube by reusing the ring cap from the host mount. While it has been optimized for use with the NightForce ATACR, it is compatible with a wide range of other higher power magnified optics.

The 30mm ROF-SAR is a drop-in upgrade for 30mm optics. The ROF-SAR adds a mounting point for an AIMPOINT Micro (T1-T2-CompM5) to provide for quick transition to a non-magnified optic for close-range target engagement. The ROF-SAR allows for user to orient the Micro optic at their desired orientation around the magnified optic.

The Reptilia ROF-SAR is a drop-in upgrade for magnified scopes with an objective diameter of 1.3 inches (33mm) or less. Available initially to fit 30mm scope tubes, it adds a mounting point for a Leupold Delta Point Pro to provide a fast, close-range option to your magnified scope.

The Reptilia ROF SAR is a drop-in upgrade for magnified scopes with an objective diameter of 1.3 inches or less. Available initially to fit 30mm scope tubes, it adds a mounting point for a Trijicon RMR to provide a fast, close-range option to your magnified scope.

The Reptilia ROF-45 is a drop-in upgrade for magnified scope mounts. Built for the Reptilia AUS Mount or Geissele Super Precision 30mm optic mount, ROF-45 adds a mounting point for a Trijicon RMR to provide a fast, close-range optic to your magnified scope.

The 34mm ROF-45 is a drop-in upgrade for the Reptilia AUS Mount or Geissele Super Precision 34mm optic mount. The ROF-45 adds a mounting point at 45 (01:30) for a Trijicon RMR to provide for quick transition to a non-magnified optic for close-range target engagement.