FEATURES
-Caliber: 5.56mm/.223
-Diameter=0.735″
-Length=2.225″
-Weight=1.8 oz.
-Thread Pitch=1/2″x28
-Finish=Melonite QPQ
-Includes Low Profile Crush Washer

FEATURES
-Manufactured from high quality steel
-Finished with a Mil-Spec phosphate coating
-Length: 0.95″
-Bore diameter of .750″
-Mounted by the use of two clamping screws

FEATURES
-Manufactured from high quality steel
-Finished with a Mil-Spec phosphate coating
-Length: 0.95″
-Bore diameter of .750″
-Mounted by the use of two set screws

FEATURES
-Caliber: 5.56mm/.223
-Diameter=0.735″
-Length=2.225″
-Weight=2 oz.
-Thread Pitch=1/2″x28
-Finish=Melonite QPQ
-Includes Low Profile Crush Washer

YHM’s M-Lok Picatinny Adapter allows you to mount Picatinny accessories to your M-Lok handguard. The Continuous M-Lok Rail System or C.M.R.S. can be mounted end-to-end to create a continuous Picatinny rail. Made from 6061-T6 aluminum that is hardcoat anodized and feature stainless M-Lok screws and nuts.

FEATURES
-Can be installed onto any M-Lok® rail to allow the use of swiveling sling stud
-Ambidextrous design, made from aircraft quality aluminum & hardcoated to mil-spec

This flash hider is designed to replace the standard M14 flash hider and sight assembly. Simply remove your stock flash hider / sight assembly reinstall your stock sight post onto our mount and install the new assembly onto the barrel. Used in conjunction with our Resonator and Phantom .30 Cal. Q.D. Sound Suppressors. It retains the excellent flash hiding capabilities of the original Phantom. (Sight base does not fit models with 18.5" or shorter barrels).

This flash hider WILL NOT accommodate our 5.56 QD Sound Suppressor.

• Thread Pitch: .595" (19/32)
• Length: 3 inches
• Weight: 5.536 Oz

The devices should be torqued to between 20 and 30 Ft-lbs.

Standard on the YHM-15 rifles and carbines. Their black plated gas tubes look better than a standard gas tube when used on their vented forearms.

The ideal Mini Q.D. Flash Hider for YHM's fast-attach sound suppressor systems. The Mini Q.D. Flash Hider is YHM engineering perfection. Compact at only 2 1/8" inches and weighing just 3.3 ounces the Mini Q.D. Flash Hider was designed for today's competitive shooter. No shortcuts were taken and users will find that the Mini Q.D. Flash Hider is still capable of being shot comfortably unsuppressed or suppressed.

The muzzle device length is 2.118". Length added to the barrel is 1.493" (on barrels with 0.6" threads).

Must locate on the shoulder behind the thread

• 2 1/8" overall length
• 3.3 Oz.
• Phosphate finish 
• These flash hiders ARE COMPATIBLE with: Turbo T2's Turbo K's Resonator's Resonator R2's Resonator K's Nitro .30 all Phantom .30 caliber suppressors as well as our new R9 9mm NITRO N2O sound suppressors and Wraith 9 XL. 
• These flash hiders WILL NOT fit: Original TURBO Phantom 5.56mm/.223 suppressors Wraith 45 XL Phantom .338. 
• The device should be torqued to between 20 and 30 Ft-lbs.

FEATURES:
-1.6″ Overall length
-3.2 oz.
-Melonite QPQ finish
-Includes shim set for barrel timing

FEATURES
-Fits any Picatinny rail
-Elevates you accessories 1/2″
-Great for elevating scopes, sights, flashlights, etc.
-Made from aircraft quality aluminum
-Hardcoat anodized matte black to Military Specifications or better
-1-1/4″ long

FEATURES
-Fits any Picatinny rail
-Elevates you accessories 1/2″
-Great for elevating scopes, sights, flashlights, etc.
-Made from aircraft quality aluminum
-Hardcoat anodized matte black to Military Specifications or better
-3/4″ long

Following the successful release of YHM S.L.K. and KR7 KeyMod handguards and in response to customer demand, Yankee Hill Machine is proud to introduce their new line of M-LOK rails, providing the same lightweight durability with the added versatility of the popular mounting platform. The MR7 is one of their lightest handguards to date, but you can still add accessories along the entire handguard length, even at every 45 degree position. Note: This handguard features a T marked extended top rail.

Following the successful release of YHM S.L.K. and KR7 KeyMod handguards and in response to customer demand, Yankee Hill Machine is proud to introduce their new line of M-LOK rails, providing the same lightweight durability with the added versatility of the popular mounting platform. The MR7 is one of their lightest handguards to date, but you can still add accessories along the entire handguard length, even at every 45 degree position. Note: This handguard features a T marked extended top rail.

The YHM Nielsen Booster Assembly replaces the direct thread adapter on a YHM Sound suppressor or any other suppressor on the market which utilizes the 1-3/8"-24 thread. They are designed to be used on handguns and barrels which require a Nielsen Booster. 

Compatible Pistons:

• Silencerco
• Rugged
• Deadair Odessa

Features:

• Replaces your 1-3/8"-24 Adapter
• 17-4 Stainless Steel
• Black Oxide
• 1-3/8”-24 Mount Thread Pitch
• *DOES NOT INCLUDE PISTON*
• **NOT COMPATABLE WITH SIDEWINDER PISTONS**

YHM’s Nielsen Pistons are compatible with YHM’s booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

• Weight: 1.40 oz.
• Not compatible with original Sidewinder. Will work with Sidewinder M2 suppressors.

YHM’s Nielsen Pistons are compatible with YHM’s booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

• Weight: 1.40 oz.
• Not compatible with original Sidewinder. Will work with Sidewinder M2 suppressors.

YHM’s Nielsen Pistons are compatible with YHM’s booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

• Weight: 1.40 oz.
• Not compatible with original Sidewinder. Will work with Sidewinder M2 suppressors.

YHM’s Nielsen Pistons are compatible with YHM’s booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

• Weight: 1.40 oz.
• Not compatible with original Sidewinder. Will work with Sidewinder M2 suppressors.

YHM’s Nielsen Pistons are compatible with YHM’s booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

• Weight: 1.40 oz.
• Not compatible with original Sidewinder. Will work with Sidewinder M2 suppressors.

YHM’s Nielsen Pistons are compatible with YHM’s booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

• Weight: 1.40 oz.
• Not compatible with original Sidewinder. Will work with Sidewinder M2 suppressors.

YHM’s Nielsen Pistons are compatible with YHM’s booster housing YHM-2055 as well as many popular pistol suppressors. They are constructed from heat treated 17-4 stainless steel for maximum durability and corrosion resistance. They feature 10 adjustment points to zero any impact shift. Available in a variety of thread patterns to fit most firearms.

• Weight: 1.40 oz.
• Not compatible with original Sidewinder. Will work with Sidewinder M2 suppressors.

FEATURES:
-Toothed, aggressive endcuts
-2 1/4″ long
-0.864″ outside diameter
-For barrel thread 5/8″-24
-5 port design
-Includes crush washer